A throttle position sensor (TPS) is a device that measures the position of the throttle in an internal combustion engine. The TPS is used to monitor and regulate the air/fuel mixture in the engine. The TPS is a critical sensor in the engine management system.
The TPS consists of a potentiometer that measures the position of the throttle, and a switch that sends a signal to the engine control unit (ECU). The TPS is mounted on the throttle body.
The TPS wiring harness consists of three wires: power, ground, and signal. The power wire supplies voltage to the TPS. The ground wire completes the circuit. The signal wire sends a signal to the ECU.
Why Throttle Position Sensor Wiring Harness Is Necessary?
A throttle position sensor wiring harness is necessary in order to ensure that the throttle position sensor is able to properly and accurately measure the position of the throttle. This information is then used by the engine control unit to adjust the amount of fuel and air that is being delivered to the engine, which ultimately affects how much power it produces. If the wiring harness was not present, or if it was incorrectly installed, it could lead to inaccurate readings from the sensor, which would in turn cause problems with how much power the engine produces.Our Top Picks For Best Throttle Position Sensor Wiring Harness
Best Throttle Position Sensor Wiring Harness Guidance
DigiAutoPart Throttle Position Sensor (TPS) Connector wiring harnesses 13384360
A throttle position sensor (TPS) is a sensor used to monitor the position of the throttle in an internal combustion engine. The TPS is used to help control fuel injection and ignition timing. It is also used as a feedback device for the electronic control unit (ECU). The TPS connector wiring harnesses 13384360 is a direct replacement for easy installation. It is constructed from high-quality plastic for greater durability. The electrical terminals are plated with copper, nickel, or silver for robust electrical connectivity.
Common Questions on DigiAutoPart Throttle Position Sensor (TPS) Connector wiring harnesses 13384360
• What is a throttle position sensor (TPS)? The throttle position sensor (TPS) is a sensor that measures the angle of the throttle plate. The sensor output is used by the engine control unit (ECU) to determine the amount of air needed for the engine.• What is the function of the TPS Connector wiring harnesses? The TPS Connector wiring harnesses are used to connect the TPS sensor to the ECU.
• What is the maximum voltage that can be applied to the TPS sensor? The maximum voltage that can be applied to the TPS sensor is 4.5 volts.
• What is the minimum voltage that can be applied to the TPS sensor? The minimum voltage that can be applied to the TPS sensor is 0.5 volts.
Why We Like This
• 1. Direct replacement for easy installation.• 2. Constructed from high quality plastic for greater durability.• 3. Premium copper , nickel , or silver plated electrical terminals to ensure robust electrical connectivity.• 4. Wire Harness Length:10CM• 5. Fits for Buick Rendezvous(2002 2007),Chevy Avalanche 1500(2002 2006),Chevy Silverado 1500(1999 2007),GMC Sierra 1500(1999 2007)Additional Product Information
| Height | 3.15 Inches |
| Length | 4 Inches |
DigiAutoPart Throttle Position Sensor (TPS) Connector wiring harnesses 19115594
The DigiAutoPart Throttle Position Sensor (TPS) Connector wiring harness features a 10 cm wire harness length for easy installation. It is constructed from high-quality plastic for greater durability and features premium copper-, nickel-, or silver-plated electrical terminals to ensure robust electrical connectivity.
Common Questions on DigiAutoPart Throttle Position Sensor (TPS) Connector wiring harnesses 19115594
• What is the function of the Throttle Position Sensor (TPS) Connector wiring harnesses 19115594? The Throttle Position Sensor (TPS) Connector wiring harnesses 19115594 is responsible for sending signals to the engine control unit (ECU) that indicate the position of the throttle. This allows the ECU to adjust the air/fuel mixture and ignition timing to optimize engine performance.• What are the symptoms of a faulty Throttle Position Sensor (TPS) Connector wiring harnesses 19115594? Symptoms of a faulty Throttle Position Sensor (TPS) Connector wiring harnesses 19115594 can include poor engine performance, engine stalling, and increased fuel consumption.
• How do you test the Throttle Position Sensor (TPS) Connector wiring harnesses 19115594? To test the Throttle Position Sensor (TPS) Connector wiring harnesses 19115594, you will need a digital multimeter. With the engine off, disconnect the TPS connector and set the multimeter to the ohms settings. Place the probes on the terminals of the connector and check the reading. It should be within the specified range according to the manufacturer. If it is not
Why We Like This
• 1. Direct replacement for easy installation.• 2. Constructed from high quality plastic for greater durability.• 3. Premium copper , nickel , or silver plated electrical terminals to ensure robust electrical connectivity.• 4. Wire Harness Length: 10CM.• 5. Throttle Position Sensor (TPS) Connector wiring harnesses 19115594.Additional Product Information
| Height | 3.15 Inches |
| Length | 4 Inches |
| Weight | 0.0625 Pounds |
977-000 Throttle Body Position Sensor & Wiring Harness Pigtail Kit Fit for Chevy Avalanche Express Silverado Suburban, GMC Savana Sierra, Cadillac Escalade
The 977-000 Throttle Body Position Sensor & Wiring Harness Pigtail Kit is a complete sensor and wiring harness designed to fit certain Chevy and GMC vehicles. The kit includes the sensor, pigtail, and all necessary hardware for a complete installation. The sensor is used to monitor the air intake of an engine and adjust the throttle angle of fuel and ignition system accordingly. The pigtail connects the sensor to the vehicle’s wiring harness. After installation, the system should be pressure tested to ensure proper function.
Common Questions on 977-000 Throttle Body Position Sensor & Wiring Harness Pigtail Kit Fit for Chevy Avalanche Express Silverado Suburban, GMC Savana Sierra, Cadillac Escalade
• What is the name of the product? 977-000 Throttle Body Position Sensor & Wiring Harness Pigtail Kit• What is the purpose of the product? The throttle body position sensor is used to monitor the position of the throttle body and provide feedback to the engine control unit. The wiring harness pigtail kit allows for easy installation of the throttle body position sensor.
• What are the benefits of this product? This product helps improve engine performance and fuel efficiency.
• How do I install this product? Please refer to the installation instructions included with the product.
Why We Like This
• Replacement for 977 000,217 2293,12570800• Made of high quality material for reliability, durability, and longer lifespan• Undergone rigorous inspection for high quality• Comes as a whole set with sensor, pigtail, and some accessories• Used to monitor air intake of an engine”] 1. The Throttle Body Position Sensor & Wiring Harness Pigtail Kit is a replacement for the 977 000,217 2293, and 12570800. 2. Made of high quality material, it is reliability, durability, and much longer liftspan. 3. Undergone a rigorous inspection to ensure high quality, the kit includes sensor, pigtail, and some accessories. 4. Used to monitor the air intake of an engine, the Throttle Body Position Sensor & Wiring Harness Pigtail Kit can be a great replacement for your old or damaged one. 5. You can get 2 years customer service for the Throttle Body Position Sensor & Wiring Harness Pigtail Kit.Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit Compatible with Nissan 280zx Datsun 280z Maxima
If your Nissan 280zx Datsun is having trouble starting up, or if you’re noticing strange performance issues, it could be due to a problem with the fuel injector, air flow meter, or throttle position sensor. These components are all connected by wiring harnesses, so if any one of them is malfunctioning, it can cause problems with the others. Luckily, you can replace all three with one of our fuel injector, air flow meter, and throttle position sensor wiring harness connector kits. These kits come with everything you need to make the repairs, including 12 high-quality connectors. The air flow meter and throttle position sensor each get their own connector, while there are six fuel injector connectors and four additional connectors included. With these in hand, you’ll be able to quickly and easily replace any faulty wiring harnesses, getting your Nissan back up and running in no time.
Common Questions on Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit Compatible with Nissan 280zx Datsun 280z Maxima
• What is the Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit Compatible with? The Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit is compatible with the Nissan 280zx Datsun 280z Maxima.• What are the dimensions of the Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit? The Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit has the following dimensions: 4.5″ x 3.5″ x 2.5″. • What is the weight of the Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit? The Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit weighs 0.55 pounds.
• How many feet of wiring is included in the Aokus Fuel Injector Air Flow Meter Throttle Position Sensor Wiring Harness Connector Kit? The Aokus Fuel Injector Air Flow Meter
Why We Like This
• Air Flow Meter Connector• Throttle Position Sensor Connector• Six Fuel Injector Connectors• Four additional Connectors• High QualityAdditional Product Information
| Height | 1.574803148 Inches |
| Length | 3.149606296 Inches |
977-000 Throttle Body Position Sensor & Wiring Harness Pigtail Kit for GMC Sierra Savana Yukon Chevy Silverado Suburban Cadillac Escalade
977-000 Throttle Body Position Sensor & Wiring Harness Pigtail Kit for GMC Sierra Savana Yukon Chevy Silverado Suburban Cadillac Escalade A ABIGAIL Throttle Position Sensor is made of high quality material which is reliability, and durability, inform the engine management computer of the throttle valve angle which is used to regulate the fuel and ignition system. This Throttle Position Sensor fits for GMC Cadillac Escalade , Pickup and more vehicles please check the description. This Throttle Position Sensor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine GMC or Cadillac part Each Sensor is 100% tested before shipping. This Throttle Position Sensor compatible with 977-000, 217-2293, 12570800 Please check the description and compatibility chart to make sure if the sensor fits your vehicle before your purchasing. 100% satisfaction guarantee, If you have any issues with the Throttle Position Sensor, simply contact customer service for trouble shooting , replacement, or refund Our aim is to make you satisfy the parts and the service we provide for you.
Common Questions on 977-000 Throttle Body Position Sensor & Wiring Harness Pigtail Kit for GMC Sierra Savana Yukon Chevy Silverado Suburban Cadillac Escalade
• What is the part number for the throttle body position sensor on a GMC Sierra? The part number for the throttle body position sensor on a GMC Sierra is 977-000.• What is the part number for the wiring harness pigtail kit on a GMC Savana? The part number for the wiring harness pigtail kit on a GMC Savana is 977-000.
• What is the part number for the throttle body position sensor on a Chevy Silverado? The part number for the throttle body position sensor on a Chevy Silverado is 977-000.
• What is the part number for the wiring harness pigtail kit on a Chevy Suburban? The part number for the wiring harness pigtail kit on a Chevy Suburban is 977-000.
• What is the part number for the throttle body position sensor on a Cadillac Escalade? The part number for the throttle body position sensor on a Cadillac Escalade is 977-000.
Why We Like This
• Made of high quality material for reliability and durability• Informs engine management computer of throttle valve angle• A direct replacement though it is NOT a genuine GMC or Cadillac part• Compatible with 977 000, 217 2293, 12570800• 100% satisfaction guaranteeBenefits of Throttle Position Sensor Wiring Harness
A throttle position sensor (TPS) is a device used to measure the position of the throttle in an internal combustion engine. The TPS is usually located on the side of the throttle body and is connected to the engine control unit (ECU). The TPS provides input to the ECU which controls fuel injection and ignition timing. The ECU uses this information to optimize engine performance and efficiency. The benefits of a TPS include improved fuel economy, reduced emissions, and better overall engine performance.Buying Guide for Best Throttle Position Sensor Wiring Harness
When it comes to choosing the best throttle position sensor wiring harness, there are a few things you need to keep in mind. The most important thing is to make sure that the harness you select is compatible with your vehicle. There are a lot of different types of vehicles on the market, so it’s important to find a harness that will fit yours specifically. Another thing to consider is the length of the harness. You don’t want to get one that’s too short or too long for your needs. Finally, take into account the price of the harness. It’s important to find one that’s affordable but also high quality.Frequently Asked Question
What is the best way to clean a throttle position sensor wiring harness?
The best way to clean a throttle position sensor wiring harness is to use a mild soap and water solution.
How often should a throttle position sensor wiring harness be replaced?
Most experts agree that a throttle position sensor wiring harness should be replaced every 30,000 to 50,000 miles.
What is the best way to test a throttle position sensor wiring harness?
There are a few ways to test a throttle position sensor wiring harness. One way is to use a multimeter to test the continuity of the wires. Another way is to use a test light to check for power and ground.
What can cause a throttle position sensor wiring harness to fail?
The throttle position sensor wiring harness can fail due to a number of reasons, including but not limited to: -poor connection at the sensor or at the harness-wiring harnesses that are damaged, frayed, or otherwise compromised-a faulty throttle position sensor-a short circuit in the wiring harness
What are the symptoms of a throttle position sensor wiring harness failure?
A throttle position sensor wiring harness failure can cause a variety of symptoms, including engine stalling, engine misfires, and decreased engine power.