If you want to make sure that your power steering pump pulley is always in good condition, then you need to have the best power steering pump pulley tool. This tool will allow you to remove the old pulley and install a new one with ease. It is also important to have this tool because it will make sure that the new pulley is installed correctly.
Why Power Steering Pump Pulley Tool Is Necessary?
Best power steering pump pulley tool is necessary because it helps to keep the pulley in proper alignment and prevents it from wobbling. It also makes sure that the appropriate amount of tension is applied on the belts so that they do not slip.Our Top Picks For Best Power Steering Pump Pulley Tool
Best Power Steering Pump Pulley Tool Guidance
Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605
The Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set is a complete tool set for removing and installing power steering pump and alternator pulleys. The set includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve. The storage case includes usage photos. The Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set is a complete tool set for removing and installing power steering pump and alternator pulleys. The set includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve. The storage case includes usage photos.
Common Questions on Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605
• What is the Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605 used for? The Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605 is used to remove and install the power steering and alternator pulleys on a vehicle.• What are the steps to using the Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605? To use the Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605, first loosen the power steering pulley nut with the tool. Then, remove the power steering pump belt. Next, remove the alternator pulley bolts and nuts. Finally, install the new power steering and alternator pulleys.
• What are some of the features of the Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car
Why We Like This
• 1. Built to be the most reliable tools in the market today.• 2. Tool solutions for most all situations.• 3. Built to exceed tool standards.• 4. Tool set for removal and installation of power steering pump and alternator pulleys.• 5. Storage case includes usage photos.Additional Product Information
| Color | Black |
| Height | 7.25 Inches |
| Length | 3 Inches |
| Weight | 2 Pounds |
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set The Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set is a complete 7-piece set that includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool – everything you need to pull and install any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter. Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right; each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use. This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines; the two forcing screws also work with most VW vehicles’ power steering systems. This power steering pump pulley installer and
Common Questions on Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
• What is the name of the company that manufactures this product? Orion Motor Tech• What is the name of this product? Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set
• What is this product used for? This product is used to remove and install pump pulleys on Ford, GM, and Chrysler vehicles.
• How do you use this product? The product comes with instructions on how to use it.
• Are there any safety concerns with using this product? No, there are no safety concerns with using this product.
Why We Like This
• POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1 1/8, 1 1/4, 1 5/16, or 1 3/8 inch hub diameter.• COMPLETE 7 PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool; the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.• DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural grade AISI 1045 medium carbon steel for the necessary strength to get your work done right; each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.• WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt driven vacuum pumps and press on water pump pulleys in GMAdditional Product Information
| Color | black |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 2 Pounds |
Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
If you’re looking for a complete kit to help you remove and install your power steering pump pulley, look no further than the Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set. This 7-piece set includes everything you need to pull and install any pump pulley with a 1-1/8″, 1-1/4″, 1-5/16″, or 1-3/8″ hub diameter, making it compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps found in most Ford, GM, and Chrysler vehicles. The durable construction of each tool in this set is made from structural-grade AISI 1045 medium carbon steel, which is heat treated and blackened for superior strength and corrosion resistance. The two reversible puller jaws on the pulley remover also let you easily check and repair pulley flanges. In addition to the pulley puller and installer, this set also comes with a disconnect tool, 2 forcing screws, 1 sleeve, and a custom blow-molded case to keep everything organized. Intuitive and easy to use, this set also comes with clear instructions for a step-by-step operation.
Common Questions on Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
• What is the name of the company that makes this product? Orion Motor Tech• What is the name of the product? Power Steering Pump Pulley Puller Installer Tool Set
• What is this product used for? This product is used to remove and install power steering pump pulleys on Ford, GM, and Chrysler vehicles.
• How do you use this product? First, attach the two jaws of the tool onto the sides of the power steering pump pulley. Then, use the handle to push and pull the jaws in order to remove or install the pulley. Repeat this process five times with unique values in order to remove or install the power steering pump pulley.
• What are the dimensions of this product? This product is 9.5” x 7.5” x 3.5” and weighs 2.2 lbs.
Why We Like This
• 1) A complete 7 piece set for home and professional power steering repair, including a pulley remover, pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.• 2) Constructed from structural grade AISI 1045 medium carbon steel for strength and durability, with each piece heat treated and blackened for superior corrosion resistance.• 3) Compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles, as well as the belt driven vacuum pumps and press on water pump pulleys in GM’s V6 engines.• 4) Intuitive and user friendly, with clear instructions for easy step by step operation; comes with a custom blow molded case for organization and easy storage or transport.• 5) Backed by Orion Motor Tech’s 12 month 100% satisfaction guarantee for peace of mind.Additional Product Information
| Color | black |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 2 Pounds |
OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green
OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, green. For use on most domestic vehicles, the OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit makes removing and installing power steering pump pulleys a breeze. With two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps, this pulley puller installer kit also pulls pulleys on GM belt-driven vacuum pumps. Made of rugged steel for long-lasting strength and durability, the power steering pump pulley installer is designed to tackle any small pulley job. The power steering pulley removal tool comes with a handy carrying case for safe storage and easy portability.
Common Questions on OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green
• What is the OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit? The OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit is a tool designed to remove and install power steering pump pulleys on most domestic vehicles.• What are the dimensions of the OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit? The OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit has a maximum reach of 6-1/2 inches and a jaw spread of 2-3/4 inches.
• What is the weight of the OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit? The OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit weighs 1.4 pounds.
• What is the warranty on the OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit? The OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit has a lifetime warranty.
Why We Like This
• POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed on water pump pulleys of GM V6 engines.• WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt driven vacuum pumps.• HEAVY DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job.• CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability; Take this power steering pump puller/installer from job to job while keeping your puller kit organized.• PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1Additional Product Information
| Color | green |
| Height | 1 Inches |
| Length | 1 Inches |
Thorstone Power Steering Pulley Puller Installer Kit for Water Pump, Vacuum Pump Pulleys Installation Remover on Most Engines
Thorstone Power Steering Pulley Puller Installer Kit for Water Pump, Vacuum Pump Pulleys Installation Remover on Most Engines The Thorstone Power Steering Pulley Puller Installer Kit is a great tool for removing and installing pressed-on alternator, power steering pump and other pulleys. It includes special adapters for GM 32 Quad 4 engines and Ford Modular engines. Made of high carbon steel construction and excellent manufacturing process, exquisite mold and screws for your comfort. The package includes a blow molded carrying case for easy transportation, safe storage and quick organization.
Common Questions on Thorstone Power Steering Pulley Puller Installer Kit for Water Pump, Vacuum Pump Pulleys Installation Remover on Most Engines
• What are the dimensions of the Thorstone Power Steering Pulley Puller Installer Kit? The Thorstone Power Steering Pulley Puller Installer Kit has a length of 8.5”, width of 5.5”, and height of 1.5”. •• What are the dimensions of the Thorstone Power Steering Pulley Puller Installer Kit? The Thorstone Power Steering Pulley Puller Installer Kit has a length of 8.5”, width of 5.5”, and height of 1.5”.Why We Like This
• Easily remove and install pressed on alternator, power steering pump, and other pulleys• Fits on late GM, Ford, and Chrysler engines• Includes special adapters for GM 32 Quad 4 engines and Ford Modular engines• High carbon steel construction for durability• Blow molded carrying case for easy transportation and storageBenefits of Power Steering Pump Pulley Tool
A power steering pump pulley tool is a device used to remove and install the pulley on a power steering pump. This can be a difficult task without the proper tools and knowledge. The main benefit of using this type of tool is that it makes the job much easier and quicker. It is also less likely to damage the pulley or other parts of the power steering system. Another reason to use a power steering pump pulleytoolis because it helps ensure that the installation is done correctly. If done improperly, it could cause serious damage to your car’s electrical system or even void your warranty.Buying Guide for Best Power Steering Pump Pulley Tool
When looking for a power steering pump pulley tool, you want to find one that fits your specific vehicle. You also want to find one that is durable and easy to use. Here are some tips to help you find the best power steering pump pulley tool for your needs: 1. Make sure the power steering pump pulley tool you choose is compatible with your vehicle. There are many different types of tools on the market, so you’ll need to find one that specifically mentions compatibility with your car make and model. 2. Consider the materials the power steering pump pulley tool is made from. Some are made from plastic, while others are made from metal. Metal ones tend to be more durable, but they can also be more expensive. Plastic ones may not be as durable, but they’re typically more affordable. 3. Decide how easy you want the power steering pump pulley tool to be to use. Some have complicated instructions, while others are very user-friendly. If you’re not sure how easy a particular model will be to use, read online reviews from people who have used it before making your purchase. 4Frequently Asked Question
What is the best power steering pump pulley tool?
Some popular power steering pump pulley tools include the Lisle 63600 Power Steering Pulley Installer/Remover Set and the OTC 4524 Power Steering Pulley Puller.
What are the features of the best power steering pump pulley tool?
Some features to consider when choosing the best power steering pump pulley tool would be its compatibility with your car model, its durability, and its ease of use. Additionally, it is important to consider the reviews of other users before making your purchase.
What are the benefits of using the best power steering pump pulley tool?
The benefits of using the best power steering pump pulley tool are: 1. It makes it easier to remove and install the power steering pump pulley. 2. It helps to protect the power steering pump from damage. 3. It ensures that the power steering pump is properly aligned.
How does the best power steering pump pulley tool work?
The best power steering pump pulley tool works by removing the power steering pump pulley without damaging the power steering pump.
How easy is the best power steering pump pulley tool to use?
The best power steering pump pulley tool is very easy to use.