A power steering pump pulley removal tool is a specialized tool that is used to remove the power steering pump pulley from the power steering pump. This tool is necessary when replacing the power steering pump or when performing maintenance on the power steering system. The power steering pump pulley removal tool consists of a socket that fits over the center of the power steering pump pulley, and a handle that is used to turn the socket. Thesocket is attached to the handle with a long extension.
The power steering pump pulley removal tool is operated by placing the socket over the center of the power steering pump pulley and turning the handle clockwise. As the handle is turned, the socket will apply pressure to the sides of the power steering pump pulley and eventually cause it to pop off of the shaft. Once the pulley is removed, the new pulley can be installed or maintenance can be performed on the power steering system.
Why Power Steering Pump Pulley Removal Tool Is Necessary?
A power steering pump pulley removal tool is necessary because it allows you to remove the pulley from the power steering pump. without this tool, you would not be able to remove the pulley and would have to replace the entire power steering pump.Our Top Picks For Best Power Steering Pump Pulley Removal Tool
Best Power Steering Pump Pulley Removal Tool Guidance
Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605
When working on your car, it is important to have the right tools for the job. The Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set is a must-have for anyone who needs to remove or install a power steering pump or alternator pulley. This tool set comes with everything you need to get the job done right, including special installer adapters, a puller assembly with thrust bearing, jaw and sleeve, and a storage case with usage photos. The kit also includes a 14-piece set for the removal and installation of the power steering pump and alternator pulleys. With this tool set, you can easily and quickly replace your vehicle’s steering pump or alternator pulley without having to take your car to a mechanic.
Common Questions on Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case – 648605
• What are the four main steps for using this tool set? The four main steps are: (1) remove the old steering pump; (2) install the new steering pump; (3) reinstall the alternator pulley; and (4) install the new power steering pump pulley.• How do I remove the old steering pump? Place the old steering pump in the vise and use the pulley removal tool to remove the retaining nut. Then, use the steering pump removal tool to remove the old steering pump from the vehicle.
• How do I install the new steering pump? First, use the steering pump installation tool to install the new steering pump onto the vehicle. Then, use the alternator pulley install tool to install the new alternator pulley. Finally, use the power steering pump pulley install tool to install the new power steering pump pulley.
• What is the best way to store this tool set? The best way to store this tool set is in the provided storage case.
Why We Like This
• 1. Made to be the most reliable tools in the market today.• 2. Tool solutions for most all situations.• 3. Built to exceed tool standards.• 4. Tool set for removal and installation of power steering pump and alternator pulleys.• 5. Storage case includes usage photos.Additional Product Information
| Color | Black |
| Height | 7.25 Inches |
| Length | 3 Inches |
| Weight | 2 Pounds |
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
Whether you’re a professional mechanic or a passionate DIYer, having a reliable power steering pump pulley puller and installer set is essential for keeping your vehicle’s steering system in good condition. The Orion Motor Tech 7-piece Power Steering Pump Pulley Puller/Installer Set is specially designed for use with Ford, GM, and Chrysler vehicles, and is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps commonly found in these models. The set includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool, all made from structural-grade AISI 1045 medium carbon steel for superior strength and durability. The reversible puller jaw design also allows you to easily check and repair pulley flanges. Each piece is heat treated and blackened for even greater corrosion resistance. The kit comes with clear instructions for easy, step-by-step operation, and is packed in a custom blow-molded case for safe storage and easy transport. With this comprehensive set, you’ll be able to quickly and easily troubleshoot and fix any power steering problems you encounter.
Common Questions on Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
• What is the name of the company? Orion Motor Tech• What is the product? The product is a power steering pump pulley puller/installer tool set.
• What is the purpose of the product? The product is used to remove and install power steering pump pulleys on Ford, GM, and Chrysler vehicles.
• How do you use the product? The product is easy to use. Simply place the tool over the pulley, and turn the handle to remove the pulley. To install the pulley, place the tool over the pulley, and turn the handle in the opposite direction.
• What are the benefits of using this product? The product is easy to use, and it saves time and effort when removing and installing power steering pump pulleys.
Why We Like This
• Power steering repair set for home and professional use• Complete 7 piece set with pulley remover, pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and disconnect tool• Durable AISI 1045 medium carbon steel construction with heat treatment and blackening for strength and corrosion resistance• Compatible with Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles• User friendly with clear instructions and custom blow molded case for organization and easy storage or transportAdditional Product Information
| Color | black |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 2 Pounds |
ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit – Puller Removal Set for GM, Ford, Chrysler Truck
The ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit is a disconnect toolset that easily releases and installs the power steering line from the pump on most American domestic vehicles such as 1989 to current GM pickups 1T, 1/2T, and 3/4T; It also fits pulley hubs with diameters of 1-1/8 inch , 1-1/4 inch , 1-5/16 inch, and 1-3/8 inch. We recommend using lubrication on the tools before use. To use, simply place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, then place the grabber nut center piece with a die on top, tightly screw the threaded stud onto the center of the end of your puller nut, and then use a ratchet, crescent wrench, or air gun with socket to loosen and remove. This disconnect toolset is for use on Saginaw, Thompson, and Ford C111, C2 power steering pumps found on Ford, GM, and Chrysler vehicles; Two included screws are for use on most Ford, Chrysler, GM, and Volkswagen VW power steering pulleys GM 31L, 3100, 3400
Common Questions on ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit – Puller Removal Set for GM, Ford, Chrysler Truck
• What is the best way to remove a stuck power steering pump pulley? The best way to remove a stuck power steering pump pulley is with an ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit.• What is the best way to install a new power steering pump pulley? The best way to install a new power steering pump pulley is with an ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit.
• How do I use the ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit? First, place the tool over the power steering pump pulley. Second, use the ratchet to turn the tool clockwise. Third, continue turning the tool until the pulley is removed. Fourth, reverse the process to install the new pulley.
Why We Like This
• Effortlessly removes power steering lines• Easy to use• Fits your vehicle• Easy storage• Package contents include a disconnect tool, bushing, screw set, and carrying caseAdditional Product Information
| Height | 2.09842519471 Inches |
| Length | 9.29921258894 Inches |
| Weight | 2.094391489 Pounds |
OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW
Looking to remove or install a power steering pump pulley on most domestic vehicles? Check out the OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit. This handy tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps. Plus, it can pull pulleys on GM belt-driven vacuum pumps and pressed-on water pump pulleys of GM V6 engines. The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability. Plus, the power steering pump pulley installer is designed to tackle any small pulley job. When you’re done, simply store your power steering puller and installer set in the included molded carrying case.
Common Questions on OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW
• What is the OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit used for? The kit is used to remove and install power steering pump pulleys on most domestic vehicles.• What vehicles is the OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit compatible with? The kit is compatible with Ford, GM, and VW vehicles.
• How do you use the OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit? The kit is easy to use. Simply repeat the process five times with unique values.
Why We Like This
• OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW• POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles; Power steering pulley remover pulls pressed on water pump pulleys of GM V6 engines.• WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps; Pulls pulleys on GM belt driven vacuum pumps.• HEAVY DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long lasting strength and durability; Power steering pump pulley installer designed to tackle any small pulley job.• CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portAdditional Product Information
| Color | Others |
| Height | 2.3 Inches |
| Length | 9.5 Inches |
| Weight | 2.04 Pounds |
WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit Power Steering Pump Alternator Pulley
Are you in need of a Puller that can remove pressed-on alternator and power steering pulleys? Do you drive a late-model GM or Chrysler vehicle? If so, the WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit was designed with you in mind! This powerful little Puller can also install late model GM alternator and power steering pulleys, including Quad 4 pulleys. Plus, it comes in a handy carrying case for easy storage and portability. But that’s not all! The WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit can also be used to reverse the jaws to pull the alternator internal bearing on some AMC vehicles. So whether you’re a do-it-yourselfer or a professional mechanic, this versatile little tool is a must-have for anyone who works on GM or Chrysler vehicles.
Common Questions on WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit Power Steering Pump Alternator Pulley
• What are the dimensions of the WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit? The WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit has the following dimensions: 6.3 x 4.7 x 1.6 inches.• What is the weight of the WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit? The WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit weighs 1.65 pounds.
• What is the material of the WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit? The WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit is made of steel.
Why We Like This
• Easily removes and installs alternators and power steering pulleys on late model GM and Chrysler engines• Fits some AMC vehicles as well• Will NOT work on 33L and 35L Chrysler engines• Reverse the jaws to pull the alternator internal bearing• Case Dimensions: (L)9″ x(W)725″ x(H)2″ Weight 2 lbs.Benefits of Power Steering Pump Pulley Removal Tool
A power steering pulley removal tool is a must have for anyone who owns a car with power steering. The benefits of this type of tool are many and varied, but the most important benefit is that it makes removing the power steering pump much easier. Without a power steering pump removal tool, you would have to disconnect the battery, remove the entire pump assembly, and then unbolt the pulley from the engine block. With a removal tool, all you have to do is remove two bolts holding down the bracket that secures the pulley in place.Buying Guide for Best Power Steering Pump Pulley Removal Tool
A power steering pump pulley removal tool is a necessary piece of equipment for anyone who owns a vehicle with power steering. The power steering pump is responsible for providing the hydraulic pressure that assists in turning the wheels. Without this pressure, it would be very difficult to steer your vehicle. The power steering pump pulley is mounted on the front of the engine and is connected to the power steering pump by a belt. In order to remove the pulley, you will need a special tool that can be inserted between the two flanges on the back of the pulley. Once the tool is in place, you can turn the pulley counterclockwise to loosen and remove it. There are many different brands and styles of power steering pump pulley removal tools available on the market today. When choosing a tool, you want to make sure that it is made from durable material so that it will last for many years. You also want to choose a tool that fits your particular vehicle make and model. Once you have chosen a suitable power steering pump pulley removal tool, follow these instructions to safely remove your old pulley: 1) Park your vehicle on level ground and set the parking brake. Place blocks behind all four tires to prevent your car from rolling while you work.Frequently Asked Question
What are the different types of power steering pump pulley removal tools available?
There are a few different types of power steering pump pulley removal tools available, but the most common and effective type is the strap wrench. This type of wrench uses a strap or chain that wraps around the pulley and tightens, allowing for easy removal. Another type of power steering pump pulley removal tool is the impact wrench, which uses a hammering action to loosen and remove the pulley.
Which power steering pump pulley removal tool is best for my car?
Some popular power steering pump pulley removal tools include the OTC 4512 Pulley Puller and Installer Set and the Lisle 24660 Pulley Puller.
How do I use a power steering pump pulley removal tool?
To remove a power steering pump pulley, first locate the power steering pump and identify the pulley. The power steering pump pulley is usually located at the front of the power steering pump. Once the pulley is located, place the power steering pump pulley removal tool on the pulley and rotate the tool clockwise to remove the pulley.
What are the risks associated with using a power steering pump pulley removal tool?
The risks associated with using a power steering pump pulley removal tool are that the tool may slip and damage the power steering pump, or that the tool may not be properly secured and could come loose, causing injury.
What are some tips for using a power steering pump pulley removal tool?
If you’re using a power steering pump pulley removal tool, it’s important to be careful not to damage the pulley. It’s also important to make sure that the tool is properly seated on the pulley before you start to turn it.