A pilot bushing is a small, cylindrical bearing that guides the shaft of a manual transmission gearstick. Over time, the pilot bushing can wear down, causing the gearstick to become loose or sloppier in its movement. When this happens, the bushing must be removed and replaced.
There are a few different ways to remove a pilot bushing, but the best method is to use a specialised tool designed for the job. These tools can be found at most auto parts stores, and they make the process much easier and quicker. Simply insert the tool into the hole where the bushing sits and carefully turn it until the bushing pops out.
Why Pilot Bushing Removal Tool Is Necessary?
A bushing is a metal sleeve that’s press-fit into another component. The best pilot bushing removal tool helps to remove them without damaging the component.Our Top Picks For Best Pilot Bushing Removal Tool
Best Pilot Bushing Removal Tool Guidance
Lisle 55600 Clutch Pilot Bushing Remover
Lisle 55600 is a clutch pilot bushing remover that uses hydraulic pressure to remove brass and bronze bushings. It has a self-tapping tip that you screw into the brass or bronze bushing, and it fits bushings from 1/2 inch to 3/4 inch inner diameter. This tool is not for use on steel bearings.
Common Questions on Lisle 55600 Clutch Pilot Bushing Remover
• What is Lisle 55600 Clutch Pilot Bushing Remover? Lisle 55600 Clutch Pilot Bushing Remover is a tool used to remove clutch pilot bushings.• How is Lisle 55600 Clutch Pilot Bushing Remover used? Lisle 55600 Clutch Pilot Bushing Remover is used by inserting it into the clutch pilot bushing and turning it clockwise until the bushing is released.
• What are the dimensions of Lisle 55600 Clutch Pilot Bushing Remover? Lisle 55600 Clutch Pilot Bushing Remover is 3.5” long and has a diameter of 0.75”. • How much does Lisle 55600 Clutch Pilot Bushing Remover weigh? Lisle 55600 Clutch Pilot Bushing Remover weighs 0.4 lbs.
• What is the warranty on Lisle 55600 Clutch Pilot Bushing Remover? Lisle 55600 Clutch Pilot Bushing Remover has a one year warranty.
Why We Like This
Uses hydraulic pressure to remove brass and bronze bushings Fits brass or bronze bushings from 1/2 inch to 3/4 inch inner diameter Screw the self tapping tip 2 3 threads into the brass or bronze bushing Not for use on steel bearings Hydraulic pressure removes bushings without damageAdditional Product Information
| Color | U.S. |
| Height | 1.6 Inches |
| Length | 5.7 Inches |
| Weight | 0.25 Pounds |
Powerbuilt Pilot Bearing Puller, Remove Bearings and Bushings, Foreign and Domestic Car Repair, Storage Case – 648619
If you’re in the market for a reliable pilot bearing puller, look no further than the Powerbuilt 648619. This heavy duty puller features 1 1/2-Inch fingers for an extra deep reach, and is made from plated steel and black oxide for durability. The included storage case also contains usage photos to help you get the most out of your new tool.
Common Questions on Powerbuilt Pilot Bearing Puller, Remove Bearings and Bushings, Foreign and Domestic Car Repair, Storage Case – 648619
• What is the process for removing bearings and bushings with the Powerbuilt Pilot Bearing Puller? The process for removing bearings and bushings with the Powerbuilt Pilot Bearing Puller is relatively simple. First, the pilot bearing puller is attached to the bearing or bushing that needs to be removed. Second, the handle is turned to tighten the jaws of the puller onto the bearing or bushing. Third, the bearing or bushing is removed from the object it is mounted on by turning the handle of the puller in the opposite direction. Finally, the puller is detached from the bearing or bushing.• What are some of the benefits of using the Powerbuilt Pilot Bearing Puller? Some of the benefits of using the Powerbuilt Pilot Bearing Puller include its ability to remove bearings and bushings quickly and easily, as well as its compact size and durable construction. Additionally, the puller comes with a storage case for easy transportation and storage.
• What are some of the applications for the Powerbuilt Pilot Bearing Puller? The Powerbuilt Pilot Bearing Puller can be used for a variety of applications, including removing bearings and bushings from foreign and domestic cars, as
Why We Like This
• 1. Made to be the most reliable tools in the market today.• 2. Tool solutions for most all situations.• 3. Built to exceed tool standards.• 4. Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement.• 5. Heavy duty puller with 1 1/2 Inch fingers for an extra deep reach.Additional Product Information
| Color | Silver |
| Height | 7.25 Inches |
| Length | 2.88 Inches |
| Weight | 3.14 Pounds |
Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS
Orion Motor Tech’s blind hole collet bearing race and seal puller extractor kit is a complete set of tools for removing bearings, bushings, and other parts from a variety of vehicles. The set includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to accommodate parts from 1/4 to 2-1/3 inch diameter (6-59 mm). The tools are made from AISI 1045 medium carbon steel for durability, and the collets are chromoly steel for strength. The set is easy to use: just fit the appropriate collet, lock it into the inner race, and pull the slide hammer’s weight back to easily knock out the bearing or bushing. For tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part. The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Common Questions on Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS
• What is the name of the company that manufactures the Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS? The manufacturer of the Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS is Orion Motor Tech.• Where is the company located? The company is located in China.
• What is the price of the product? The price of the product is $48.99.
• What is the shipping weight of the product? The shipping weight of the product is 4.85 pounds.
• What are the dimensions of the product? The dimensions of the product are 9.45 x 6.3 x 3.54 inches.
Why We Like This
• 1. This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2 1/3 inch diameter (6 59 mm).• 2. These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.• 3. This internal bearing puller set’s expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.• 4. For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer’s weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.• 5. The custom blow molded case keeps everything organized and easy to carry or store as needed.Additional Product Information
| Color | Silver + Black |
| Height | 4.72 Inches |
| Length | 18.5 Inches |
| Weight | 11 Pounds |
OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle
A pilot bearing or bushing is a small bearing that helps to keep the crankshaft in place in an engine. Over time, these bearings can become worn out and need to be replaced. The OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle is a tool that can be used to remove a pilot bearing or bushing from the end of the crankshaft. The OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle is a simple, easy-to-use tool that eliminates the need for other tools to drive the puller. The bridge style design keeps the jaws from spinning when force is engaged, and the tee handle design makes it easy to use. The spread ranges from 1/2 inch to 1-1/2 inches, and the reach has a minimum/maximum range of 3/16 inch to 1-1/4 inches. The high-grade materials used in the construction of the tool ensure quality performance over the lifetime of the tool.
Common Questions on OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle
• What is the jaws’ reach on the OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle? The jaws have a reach of 1.875 inches.• What is the maximum capacity of the OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle? The maximum capacity of the OTC 4422 is 7.25 inches.
• What is the minimum pilot bearing bore size for the OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle? The minimum pilot bearing bore size is .875 inches.
• What is the maximum pilot bearing bore size for the OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle? The maximum pilot bearing bore size is 2.625 inches.
• How much does the OTC 4422 Bridge Style, 2-Jaw Pilot Bearing/Bushing Puller with Tee-Handle weigh? The OTC 4422 weighs 3.9 pounds.
Why We Like This
• For removing pilot bearings and bushings• Restriction plate catches bridge to prevent jaws from spinning• Tee handle design is easy to use and eliminates the need for other tools• Spread ranges from 1/2 inch to 1 1/2 inches• Reach has a minimum/maximum range of 3/16 inch to 1 1/4 inchesAdditional Product Information
| Height | 1.7 Inches |
| Length | 7.7 Inches |
| Weight | 2.3 Pounds |
Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Bearing Removal Tool Set, 16 Pieces
This 16-piece blind bearing puller set comes with a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to remove axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts. Made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use, the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble. The expandable collets and threaded screw adapters fit tight and jammed parts on a wide variety of vehicles, while the blow-molded case keeps everything organized and easy to carry or store as needed.
Common Questions on Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Bearing Removal Tool Set, 16 Pieces
• What is the function of a blind hole collet bearing race and seal puller extractor kit? The blind hole collet bearing race and seal puller extractor kit is used to remove bearings from blind holes.• How do you use a blind hole collet bearing race and seal puller extractor kit? To use the blind hole collet bearing race and seal puller extractor kit, first select the appropriate size collet for the blind hole. Insert the collet into the blind hole until it is seated against the bearing. Then, use the slide hammer to apply pressure to the collet. The collet will grip the bearing and allow you to remove it from the blind hole.
• What are the benefits of using a blind hole collet bearing race and seal puller extractor kit? The benefits of using a blind hole collet bearing race and seal puller extractor kit include being able to remove bearings from blind holes without damaging the holes, being able to reuse the bearings, and being able to remove bearings from difficult-to-reach locations.
Why We Like This
• 16 piece set includes slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets• Made from AISI 1045 medium carbon steel forged and galvanized for long term durability• Collets are chromoly steel for stubborn blind bearings and bushings• Expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings• Blow molded case for organization and easy storageAdditional Product Information
| Color | blue case |
| Height | 5 Inches |
| Length | 18 Inches |
| Weight | 11 Pounds |
Benefits of Pilot Bushing Removal Tool
A bushing is a type of sleeve used to protect or cover a machine part. A pilot bushing removal tool makes it easy and efficient to remove pilot bushings from machines such as engines without damaging the surrounding areas.Buying Guide for Best Pilot Bushing Removal Tool
A bushing is a type of mechanical coupling that connects two rotating shafts or axles. A pilot bushing removal tool is used to remove a pilot bushing from a rotating shaft. There are many different types and sizes of pilot bushings, so it is important to choose the proper removal tool for the job. The most common type of pilot bushing removal tool is a drill bit with a hexagonal head. The drill bit is inserted into the center of the pilot bushing, and then turned counterclockwise to loosen and remove the bushing. Another type of removal tool is a flat-head screwdriver. The screwdriver is inserted into one of the slots on the side of the hexagonal head, and turned counterclockwise to loosen and remove the bushing. There are also several specialized Pilot Bushing Removal Tools available on the market. These tools are designed to grip the sides of the hexagonal head, making it easier to loosen and remove the bushing. Some models also include an integrated hex driver, which can be used to install new bushings after removing old ones. When purchasing a Pilot Bushing Removal Tool, be sure to select one that is made from high-quality materials such as hardened steel. This will ensure that the tool can withstand repeated use without breaking or bending. Also, be sure to choose a model that fits your specific make and model of vehicle; some tools are not compatible with all vehiclesFrequently Asked Question
What is the best pilot bushing removal tool?
There are a few different types of pilot bushing removal tools, but the best one to use depends on the specific make and model of your vehicle. Many auto parts stores will have the appropriate tool for your car.
What are the features of the best pilot bushing removal tool?
The best pilot bushing removal tool will have a number of features that make it easy to use and effective. These features include a sharp cutting edge to quickly remove the pilot bushing, a comfortable grip to reduce fatigue, and a durable construction to withstand repeated use.
What are the benefits of using the best pilot bushing removal tool?
There are many benefits of using the best pilot bushing removal tool. Some of these benefits include: -The ability to remove the pilot bushing without damaging the surrounding area-The ability to remove the pilot bushing without having to remove the entire engine-The ability to remove the pilot bushing without having to use a lot of force-The ability to remove the pilot bushing without having to use a lot of tools
How does the best pilot bushing removal tool work?
Most pilot bushing removal tools work by either pushing or pulling the pilot bushing out of its housing. Some pilot bushing removal tools may also require the use of a hammer to help dislodge the pilot bushing from its housing.
What are the applications of the best pilot bushing removal tool?
There are many applications for the best pilot bushing removal tool, including removing pilot bushings from aircraft engines, vehicles, and machinery.