A crankshaft pulley is located at the end of the crankshaft, and it provides a place to connect engine accessories such as the alternator, power steering pump, and water pump. The pulley also has weight that helps to counterbalance the engine’s reciprocating forces. Most crankshaft pulleys are made of aluminum or steel.
When removing a crankshaft pulley, a special tool called a crankshaft pulley puller is required. This tool attaches to the hub of the pulley and uses long bolts to apply pressure to the back side of the hub, causing the pulley to come loose from the shaft. Some pullers also have jaws that grab onto the front of the hub to provide additional pulling power.
Why Ls Crank Pulley Puller Is Necessary?
A best ls crank pulley puller is necessary to remove harmonic balancers or pulleys from your engine’s crankshaft. This guide will show you how to use one properly and safely. Harmonic balancers and crankshaft pulleys can wear out over time, causing vibrations that can damage your engine. If you need to replace either of these parts, you’ll need a special tool called a crank pulley puller. Best ls crank pulley pullers are designed for specific makes and models of cars, so be sure to choose the right one for your vehicle.Our Top Picks For Best Ls Crank Pulley Puller
Best Ls Crank Pulley Puller Guidance
OEMTOOLS 25264 GM Harmonic Balancer Puller, LS Crank Pulley Puller, Remove LS Balancer Without Tapped Holes, No Radiator Removal Necessary, For use with GM, Chrysler, Jeep, Dodge
OEMTOOLS 25264 GM Harmonic Balancer Puller, LS Crank Pulley Puller, Remove LS Balancer Without Tapped Holes, No Radiator Removal Necessary, For use with GM, Chrysler, Jeep, Dodge If you need to remove or install a harmonic balancer on a GM vehicle without tapped holes, this is the puller for you. The specialized low profile design means you don’t have to remove the radiator first, saving you time and effort. The clip in design offers a strong grip without bolting into the balancer. This puller is built to last with its single piece construction of the grip arms. It’s compatible with GM Vehicles 53 L, 57LS1, 60 LS2, 62 LS3, 70 L; Chrysler, Jeep, Dodge: 35 L V6, 36L V6, 47 L V8, 57 L V8, 61 L V8.
Common Questions on OEMTOOLS 25264 GM Harmonic Balancer Puller, LS Crank Pulley Puller, Remove LS Balancer Without Tapped Holes, No Radiator Removal Necessary, For use with GM, Chrysler, Jeep, Dodge
• Does this harmonic balancer puller work on all GM vehicles? It should work on most GM vehicles.• How do I use this harmonic balancer puller? First, you’ll need to remove the radiator cap and disconnect the negative battery terminal. Next, locate the harmonic balancer on the engine and secure the puller to the harmonic balancer. Finally, turn the handle of the puller clockwise to remove the harmonic balancer.
Why We Like This
• Remove harmonic balancer without tapped holes• Quick and easy installation• No radiator removal necessary• Ideal for use with GM vehicles• Single piece construction for durabilityAdditional Product Information
| Color | Multi |
| Height | 1 Inches |
| Length | 1 Inches |
Harmonic Balancer Install Tool Puller Crank Pulley LS1 Crankshaft Installation 551141 ICT Billet for GM 1997-Up LS/LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9
If you’re looking for an easy way to install your harmonic balancer, ICT Billet has the perfect solution. The Harmonic Balancer Install Tool Puller Crank Pulley LS1 Crankshaft Installation 551141 makes it a breeze to get the job done, and it’s compatible with all GM LS engines. Simply thread the tool into the crankshaft, push the crankshaft pulley into position, and tighten the nut. It’s that easy! Plus, the galvanized steel nuts and aluminum washers are durable and long-lasting, so you can use this tool over and over again.
Common Questions on Harmonic Balancer Install Tool Puller Crank Pulley LS1 Crankshaft Installation 551141 ICT Billet for GM 1997-Up LS/LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9
• What is the Harmonic Balancer Install Tool Puller Crank Pulley LS1 Crankshaft Installation 551141 ICT Billet for GM 1997-Up LS/LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9? The Harmonic Balancer Install Tool Puller Crank Pulley LS1 Crankshaft Installation 551141 ICT Billet for GM 1997-Up LS/LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9 is a tool used to install a harmonic balancer on a GM LS engine.• How is the Harmonic Balancer Install Tool Puller Crank Pulley LS1 Crankshaft Installation 551141 ICT Billet for GM 1997-Up LS/LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9 used? The tool is used to pull the harmonic balancer onto the crankshaft.
• What are the dimensions of the Harmonic Balancer Install Tool Puller Crank Pulley LS1 Crankshaft Installation 551141 ICT Billet for GM 1997-Up LS
Why We Like This
• Durable and useful, long lasting service• Anti rust and corrosion resistance• Fits all GM based LS engines• Great for installing the harmonic balancer on your LS based engine• This is a must have for engine swaps or upgrading the balancerAdditional Product Information
| Height | 1.57 Inches |
| Length | 5.91 Inches |
25264 GM Harmonic Balancer Puller, LS Crank Pulley Puller, Crank Pulley Puller, without Tapped Holes Quickly Removes Harmonic Balancer Puller Kit, No Need to Remove the Radiator.
The 25264 GM Harmonic Balancer Puller is a handy tool that quickly removes harmonic balancers without the need to remove the radiator. It features a unique design that allows it to be used on a variety of different models, making it a versatile tool for any mechanic. The Puller is made of special steel material and is coated with an anti-oxidation, anti-corrosion coating, making it durable and corrosion-resistant. The Puller is also easy to use, making it a convenient tool for any mechanic.
Common Questions on 25264 GM Harmonic Balancer Puller, LS Crank Pulley Puller, Crank Pulley Puller, without Tapped Holes Quickly Removes Harmonic Balancer Puller Kit, No Need to Remove the Radiator.
• What is the use of a harmonic balancer puller? A harmonic balancer puller is used to remove the harmonic balancer from the engine.• What is the use of a LS crank pulley puller? A LS crank pulley puller is used to remove the crankshaft pulley from the engine.
• What is the use of a crank pulley puller? A crank pulley puller is used to remove the crankshaft pulley from the engine.
• How does the harmonic balancer puller kit work? The harmonic balancer puller kit works by delivering a blow to the harmonic balancer which breaks it free from the engine.
Why We Like This
• Quickly removes harmonic balancer• No need to remove the radiator• Sturdy structure prevents breaking• Compatible with many models• Easy to disassembleORION MOTOR TECH Harmonic Balancer Puller for Engine Balancer Removal Replacement, LS Crank Pulley Puller Compatible with GM Chrysler Jeep Dodge, Harmonic Damper Puller with 24MM Socket
A harmonic balancer is a device that helps to keep your engine’s crankshaft in balance, absorbing vibrations that could cause damage to the engine. The Orion Motor Tech Harmonic Balancer Puller is a tool that makes it easy to remove and replace your engine’s harmonic balancer. This puller features a forcing bolt that provides plenty of pressure to loosen the harmonic balancer, and a three-jaw design that firmly clamps onto the back of the balancer to distribute an even pulling force. The included 24mm hex socket makes it quick and easy to remove the harmonic damper without tapped holes.
Common Questions on ORION MOTOR TECH Harmonic Balancer Puller for Engine Balancer Removal Replacement, LS Crank Pulley Puller Compatible with GM Chrysler Jeep Dodge, Harmonic Damper Puller with 24MM Socket
• What is ORION MOTOR TECH Harmonic Balancer Puller for Engine Balancer Removal Replacement, LS Crank Pulley Puller Compatible with GM Chrysler Jeep Dodge, Harmonic Damper Puller with 24MM Socket? This puller is designed to remove harmonic balancers, LS engine crank pulleys, and other clutch-type pulleys on most AMC, Chrysler, Dodge, Ford, Jeep, and Plymouth vehicles. It comes with a 24mm socket for added versatility.• How do I use the ORION MOTOR TECH Harmonic Balancer Puller for Engine Balancer Removal Replacement, LS Crank Pulley Puller Compatible with GM Chrysler Jeep Dodge, Harmonic Damper Puller with 24MM Socket? First, ensure that the vehicle is in park or neutral with the emergency brake engaged. Remove the dust cover, if applicable. Next, insert the harmonic balancer puller tool into the harmonic balancer until the jaws are seated against the back of the harmonic balancer.Thread the harmoniic balancer bolt into the center of the harmonic balancer until it is snug. While holding the body of the harmonic balancer puller tool with one hand, use the other hand to tighten the bolt
Why We Like This
• Quick balancer removal• Durable construction• Safe and easy operation• Compatible with GM, Chrysler, Jeep, and Dodge vehicles• Includes a quality socketAdditional Product Information
| Height | 5 Inches |
| Length | 4 Inches |
For GM LS Harmonic Balancer Puller 25264 Crank Pulley Puller Automotive Replacement Engine Quickly Removes Harmonic Balancers without Tapped Holes
Harmonic balancers are devices that are mounted on the engine crankshaft of automobiles. Their purpose is to cancel out any vibrations that the engine produces, making for a smoother and more comfortable ride. Many harmonic balancers are equipped with tapped holes, which allow for easy removal with a harmonic balancer puller. However, some models do not have these holes, making removal more difficult. The GM LS Harmonic Balancer Puller is a tool designed specifically for removing harmonic balancers without tapped holes. It is constructed from high quality carbon steel for durability, and features a unique clamp-in design that allows for easy removal without disassembling the radiator. This puller is compatible with GM engine models 53L, 57 LS1, 60 LS2, 62 LS3, and 70L, as well as Chrysler, Dodge, and Jeep engine models 35 L V6, 36L V6, 47 L V8, 57 L V8, and 61 L V8. It is backed by a satisfaction guarantee and a 12 month warranty.
Common Questions on For GM LS Harmonic Balancer Puller 25264 Crank Pulley Puller Automotive Replacement Engine Quickly Removes Harmonic Balancers without Tapped Holes
• What is the GM LS Harmonic Balancer Puller? The GM LS Harmonic Balancer Puller is a tool used to quickly and easily remove harmonic balancers without tapped holes.• How is the GM LS Harmonic Balancer Puller used? The GM LS Harmonic Balancer Puller is inserted into the center of the harmonic balancer and then turned clockwise to remove the balancer.
• What are the benefits of using the GM LS Harmonic Balancer Puller? The GM LS Harmonic Balancer Puller is a quick and easy way to remove harmonic balancers without tapped holes.
Why We Like This
• Compatible with GM and Chrysler/Dodge/Jeep engines• Unique design allows for quick and easy removal of harmonic balancers• Made from high quality carbon steel for durability• Black paint resists corrosion and rust• Buckle attachment does not require disassembly of the radiatorBenefits of Ls Crank Pulley Puller
There are many benefits of using the best ls crank pulley puller. Some of these benefits include: 1. The best ls crank pulley puller helps to save time and energy when removing crankshafts from engines. 2. It is very easy to use the best ls crank pulley puller and it requires less effort as compare to other methods such as prying or hitting with a hammer. 3.Buying Guide for Best Ls Crank Pulley Puller
In order to choose the best ls crank pulley puller for your needs, there are a few things you should keep in mind. First, consider the size of the ls crank pulley puller. There are many different sizes available, so make sure to choose one that is large enough to accommodate the size of your ls crank pulley. Second, think about the material that the ls crank pulley puller is made from. Some materials are better than others at resisting wear and tear, so you’ll want to choose one that will hold up well over time. Third, take into account how easy or difficult the ls crank pulley puller is to use. Some models are easier to use than others, so be sure to read the instructions carefully before using it. Finally, make sure to pick a reputable brand when choosing an ls crank pulley puller. This will ensure that you’re getting a quality product that will last for years to come.Frequently Asked Question
What are the different types of ls crank pulley pullers?
There are many different designs of ls crank pulley pullers. Some are more universal and will work with a variety of ls engines, while others are specific to certain engines. Some of the more common ls crank pulley pullers are the J-tool, the L-tool, and the R-tool.
How do you use an ls crank pulley puller?
To use an ls crank pulley puller, first remove the serpentine belt from the engine. Next, locate the crank pulley and position the puller so that the jaws are seated on the pulley. Finally, turn the handle to remove the pulley.
What are the benefits of using an ls crank pulley puller?
There are many benefits to using an ls crank pulley puller. Some of these benefits include: 1. It makes removing the crank pulley much easier and faster. 2. It helps to protect the crankshaft from damage when removing the pulley. 3. It prevents the pulley from becoming damaged during removal. 4. It helps to ensure that the pulley is properly aligned when reinstalling it. 5. It makes it easier to remove and install the crank pulley without having to remove the engine.
How do you properly care for an ls crank pulley puller?
You should clean the ls crank pulley puller after each use with a clean rag and some lubricant.
What are some common mistakes people make when using an ls crank pulley puller?
Some common mistakes people make when using an ls crank pulley puller include not securing the pulley to the engine block, not using the correct size socket, and not using a torque wrench to properly tighten the pulley bolt.