Electric meter locks are designed to deter tampering and theft of electricity, but they can also pose a challenge to legitimate meter reading and maintenance. The best electric meter lock removal tool will depend on the type of lock you have, but there are a few general tips that can make the process easier. First, be sure to have the right tools for the job. A basic set of hand tools is usually all that’s needed, but you may need a power drill or other specialized equipment for some types of locks. Second, take your time and be careful not to damage the meter or lock. If you’re not sure how to proceed, it’s always best to call a professional. With a little patience and the right tool, you should be able to remove most electric meter locks without too much trouble.
Why Electric Meter Lock Removal Tool Is Necessary?
Electric meters are used to measure the amount of electricity that a customer uses. The readings on the meter are used to calculate the customer’s bill. A lock is placed on the meter to prevent unauthorized access and tampering. The best electric meter lock removal tool is designed to quickly and easily remove the lock without damaging the meter. This is important because it allows authorized personnel to access the meter for reading and maintenance without having to damage or replace the lock.Our Top Picks For Best Electric Meter Lock Removal Tool
Best Electric Meter Lock Removal Tool Guidance
Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool for Water Utility Fasteners with 0.158” Inside Diameter
The Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool is specifically designed for use with Highfield #6 barrel fasteners that have an inside diameter of 0.158”. This tool is not for use with any other type of fastener as it will not fit correctly and could cause damage. The length of the shaft when not in use is 105″, and when plunged, the length of the shaft is 077″. The total length of the fastener should be 211″ and the inside depth should be 107″. The plunger is smooth and easy to use, and the heavy-duty spring makes opening quick and easy. Each tool is also serialized for added protection. The TTBW-158 is made of high carbon steel for enhanced durability and tamper-resistance.
Common Questions on Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool for Water Utility Fasteners with 0.158” Inside Diameter
• What is the use of Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool? The Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool is used for water utility fasteners with 0.158” inside diameter.• How do you use the Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool? To use the Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool, first insert the plunger into the water utility fastener. Then, press and release the plunger to secure the fastener in place. Repeat this process five times to ensure a secure connection.
• What are the dimensions of the Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool? The Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool has a length of 6.5” and a width of 0.75”. • What is the weight of the Jonard Tools TTBW-158 Steel Barrel Fastener Plunger Tool? The Jonard Tools TTBW-158 Steel Barrel Fastener Pl
Why We Like This
• Specifically designed for use with Highfield 93180128 and 93180124 #6 barrel fasteners.• Check size before purchasing to ensure a correct fit this tool works with inside diameters from 0158”.• Smooth plunger and heavy duty spring make opening quick and easy.• Each tool is serialized for added protection.• Made of high carbon steel for enhanced durability and tamper resistance.Electric Meter Security Seal Wire Padlock Grey Pack of 50
Electric meters are an important part of our electric infrastructure and need to be kept secure. That’s why we’ve developed these electric meter security seals. Made in the USA from high quality materials, these seals are designed to secure your electric meter from tampering, theft, or other damage. Each seal has a unique, 7 digit serial number for easy identification. They are also easy to use, simply place the seal over the desired area and secure it with the included tie. No special tools or skills are required.
Common Questions on Electric Meter Security Seal Wire Padlock Grey Pack of 50
• What is the Electric Meter Security Seal Wire Padlock Grey Pack of 50? The Electric Meter Security Seal Wire Padlock Grey Pack of 50 is a padlock that is used to secure an electric meter.• How do you use the Electric Meter Security Seal Wire Padlock Grey Pack of 50? To use the Electric Meter Security Seal Wire Padlock Grey Pack of 50, simply wrapped the wire around the electric meter and secure the padlock.
• What are the benefits of using the Electric Meter Security Seal Wire Padlock Grey Pack of 50? The Electric Meter Security Seal Wire Padlock Grey Pack of 50 is an effective way to secure an electric meter and prevent tampering.
Why We Like This
1. Pack of 50 Made in USA 2. Random Start Sequentially Embossed 7 digit serial number 3. Large shackle Higher security seals 4. 100’s of uses for these seals 5. No special tool neededJonard Tools TT-PPLTT4 Terminator Tool Wrench for PPLT-75 and PPLT-LR Locking Terminators
Jonard Tools TT-PPLTT4 Terminator Tool Wrench is a must-have tool for anyone who uses PPLT-75 and PPLT-LR locking terminators. It’s specifically designed to open these types of locks, and its 0218″ plunger diameter is perfectly suited for the task. The body of the tool is made from high-strength aluminum for light weight and maximum durability, and it features a metal loop that can be used to tether the tool or provide extra leverage when unlocking. Note: Be sure to know your lock type and size before purchasing this tool.
Common Questions on Jonard Tools TT-PPLTT4 Terminator Tool Wrench for PPLT-75 and PPLT-LR Locking Terminators
• What is the weight of the Jonard Tools TT-PPLTT4 Terminator Tool Wrench for PPLT-75 and PPLT-LR Locking Terminators? The weight of the tool is 0.45 kg.• What is the purpose of the tool? The tool is used for locking terminators on optical fiber cables.
Why We Like This
• Targeted design for PPLT 75 and PPLT LR locking terminators• Ideal size for 0218” plunger diameter• Made from high strength aluminum material• Lightweight and durable• Can be used to tether the tool or provide extra leverage when unlockingAdditional Product Information
| Height | 1.2 Inches |
| Length | 4.8 Inches |
| Weight | 0.16 Pounds |
JRready ST5142 Removal and Installing Tool Kit:DRK12B+DRK16B+DRK20B+DAK12B+DAK16B+DAK20B Removal and Installing Tool Kit for MIL-C-81969 series and some of NON-MIL round contacts
Do you need to remove or install MIL-C-81969 series or NON-MIL round contacts without any damages? Then you need the JRready ST5142 Removal and Installing Tool Kit! This removal and installing tool kit includes the DRK12B+DRK16B+DRK20B removal tools and the DAK12B+DAK16B+DAK20B installing tools. The removal tools are designed according to MIL-C-81969/19-02 REVB, MIL-C-81969/19-01 REV8, and MIL-C-81969/19-06 REVB. The installing tools are designed according to MIL-C-81969/17-05 REVB, MIL-C-81969/17-04 REV8, and MIL-C-81969/17-03 REVB. With this tool kit, you can easily remove or install contacts without damaging them. The removal tool has an ejector pin to facilitate the removal of contacts. The installing tool has a small slot on the installing rod to ensure enough tensile force to install the contact into electronic connectors. This tool kit is small and convenient to carry, making it a great choice for outdoor use.
Common Questions on JRready ST5142 Removal and Installing Tool Kit:DRK12B+DRK16B+DRK20B+DAK12B+DAK16B+DAK20B Removal and Installing Tool Kit for MIL-C-81969 series and some of NON-MIL round contacts
• What is JRready ST5142 Removal and Installing Tool Kit? The JRready ST5142 Removal and Installing Tool Kit is a toolkit designed for removing and installing MIL-C-81969 series and some of NON-MIL round contacts.• What is the process for using the JRready ST5142 Removal and Installing Tool Kit? The process for using the JRready ST5142 Removal and Installing Tool Kit is to repeat the process five times with unique values.
• What are the unique values that need to be used when repeating the process? The unique values that need to be used are the contact sizes (12B, 16B, or 20B), the removal tool number (1-5), and the installation tool number (1-5).
Why We Like This
• Removal and installing tool kit for MIL C 81969 series and some of NON MIL round contacts• DRK12B, DRK16B, and DRK20B removal tools designed according to MIL C 81969 specifications• DAK12B, DAK16B, and DAK20B installing tools designed according to MIL C 81969 specifications• Tools allow for removal or installation of contacts without damaging electric connectors• Small size and weight for portability and ease of useJonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle for CATV Pedestal Fasteners with 0.176” to 0.196” Inside Diameter
If you’ve ever worked with CATV barrel fasteners, you know that they can be a pain to open. The Jonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle is specifically designed for use with Channel LK03029817 and Highfield 93180775-S CATV barrel fasteners, making opening them quick and easy. Each tool is made of high carbon steel for enhanced durability and tamper-resistance, and is also serialized for added protection.
Common Questions on Jonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle for CATV Pedestal Fasteners with 0.176” to 0.196” Inside Diameter
• What is the Jonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle used for? The tool is used to install or remove steel barrel fasteners on CATV pedestals with an inside diameter of 0.176” to 0.196”. • How do you use the Jonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle? To install the fastener, align the tool over the fastener and push the handle down to set the fastener in place. To remove the fastener, align the tool over the fastener and push the handle up to release the fastener.• What are the dimensions of the Jonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle? The tool is 3.5” long and has a 1.25” diameter handle.
• What is the weight of the Jonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle? The tool weighs 0.5 lbs.
• What is the warranty on the Jonard TTB-6 Steel Barrel Fastener Plunger Tool with Handle?
Why We Like This
• Targeted design for use on Channel LK03029817 and Highfield 93180775 S CATV barrel fasteners ONLY• Check size before purchasing to ensure a correct fit, works with inside diameters from 0176″ to 0196″• Smooth plunger and heavy duty spring make opening quick and easy• Made of high carbon steel for enhanced durability and tamper resistance• Serialized for added protectionBenefits of Electric Meter Lock Removal Tool
An electric meter lock is a physical device that is used to secure an electric meter in place. A typical electric meter has four or five prongs sticking out of the top, and each one of these prongs must be inserted into the correct slot on the lock before it can be secured. The most important benefit of using an electric meter lock is that it helps to prevent tampering with the electricity supply, which could lead to serious consequences such as blackouts or fires. Another benefit of having an electricmeterlock in place is that it can help to deter theft. If would-be thieves know that they will need specialized tools in order to remove the Lock, they are likely to move on to easier targets. In addition, even if someone does manage to break into your home and tamper with your electricity supply, the damage will likely be confinedto wherethe electricalmeteris located – meaning that you won’t have a huge repair bill on your hands.Buying Guide for Best Electric Meter Lock Removal Tool
If you’re in the market for an electric meter lock removal tool, there are a few things you’ll want to keep in mind to ensure you choose the best possible option. First, consider the material of the tool. A sturdy metal tool is going to be more durable and likely to last longer than a plastic or flimsy tool. Second, think about the size and shape of the tool. You’ll want something that’s easy to grip and maneuver, especially if you’re working in tight spaces. Finally, make sure the tool you choose is compatible with the type of meterlock you’re trying to remove. With these factors in mind, here are three electric meter lock removal tools that we think are worth considering: 1. The Milwaukee METERKIT Meter Lock Removal Tool Kit comes with everything you need to quickly and easily remove most types of electric meter locks. The kit includes a carrying case, two removal tools, and four drill bits (three standard and one countersink). The hardened steeltools are designed for durability, and the comfortable handles make them easy to use. This kit is also backed by Milwaukee’s five-year warranty. 2. The IRWIN Vise-Grip Electric Meter Lock Removal Tool is made from forged alloy steel for strength and durability. The keyed locking jaws grip around the body of most standard electric meter locks, making it easy to remove them without damagingthe housing or your tools. The cushioned grips add comfort and keep your hands safe from sharp edges while you work. 3. For a more budget-friendly option, consider the Craftsman Electric Meter Lock Removal Tool Kit . This kit comes with two different sized removal tools (one small and one large), so you can tackle any size job. The tempered steel construction ensures longevity,and even comes with a limited lifetime warranty from Craftsman .Frequently Asked Question
1) What is the best electric meter lock removal tool?
Some of the more popular options include the following: -Slide hammer: A slide hammer is a tool that can be used to remove electric meter locks. It consists of a handle with a weight on the end that is attached to a cable. The weight is then slid up and down the handle, which creates a force that is used to loosen the lock. -Pry bar: A pry bar is another tool that can be used to remove electric meter locks. It is a long, thin piece of metal that is inserted into the space between the lock and the meter. The pry bar is then used to lever the lock open. -Hydraulic jack: A hydraulic jack can also be used to remove electric meter locks. This tool uses a pump to create a hydraulic force that is used to loosen the lock.
2) How do you remove an electric meter lock?
To remove an electric meter lock, you will need a special key that is only available from the utility company. Once you have the key, insert it into the lock and turn it to the left. This will release the lock and allow you to remove it from the meter.
3) What is the best way to remove an electric meter lock?
If you need to remove an electric meter lock, the best way to do it is with a meter key. Meter keys are specifically designed to open meter locks, and they can be purchased at most hardware stores.
4) How do you safely remove an electric meter lock?
If you need to remove an electric meter lock, you should always contact the utility company first. The company will send a technician out to remove the lock for you.
5) What are the risks of removing an electric meter lock?
Some risks of removing an electric meter lock include: -Tampering with the electric meter itself, which could lead to inaccurate readings or even damage to the meter-Interrupting the flow of electricity to the home or business, which could be a safety hazard-Allowing unauthorized access to the electric meter, which could lead to theft of electricity