There are a few factors you need to consider when purchasing a dirt bike flywheel puller. The first is the type of puller. There are two main types: standard and reverse thread. Standard pullers will usually have either 3 or 4 notches cut into them, while reverse thread pullers only have 2 notches. The second factor to consider is the size of the threads on the puller. Most pullers will be 10mm x 1.0, but some may be 12mm x 1.25 or 14mm x 1.5. You’ll need to know the thread size so you can purchase the correct size bolts to attach the puller to the flywheel. Finally, you’ll need to decide if you want a single or double pronged puller. Single pronged pullers are slightly less expensive, but they can damage the flywheel if not used correctly. Double pronged pullers are more expensive, but they’re less likely to damage the flywheel.
Why Dirt Bike Flywheel Puller Is Necessary?
The average two-stroke engine produces more power than the average four-stroke engine. This is because two-strokes have a higher power-to-weight ratio. They also tend to rev higher, which further increases their power output. However, all this extra power comes at a price. Two-strokes are notoriously difficult to start and often stall easily. This is where a flywheel puller comes in handy. A flywheel puller is a tool that helps to spin the crankshaft of a two-stroke engine faster, making it easier to start the engine. It does this by attaching itself to the end of the crankshaft and then leveraging its weight to help spin the crankshaft faster. Flywheel pullers are an essential piece of equipment for anyone who owns a two-stroke dirt bike .Our Top Picks For Best Dirt Bike Flywheel Puller
Best Dirt Bike Flywheel Puller Guidance
Valchoose Magneto Flywheel Puller (24mm&27mm) Sturdy Effective Work Fits for GY6 50 125 150cc Kawasaki Yamaha Suzuki Honda KTM Scooter ATV Dirt Bike
Are you having trouble removing your flywheel or stator? Use the Valchoose Flywheel & Stator Magneto Puller to make the job easier. This puller has a 24mm and 27mm side thread, making it compatible with most GY6 50, 125 and 150cc scooters and motorcycles. The durable construction and clever design make this puller an essential tool for anyone who needs to remove a flywheel or stator.
Common Questions on Valchoose Magneto Flywheel Puller (24mm&27mm) Sturdy Effective Work Fits for GY6 50 125 150cc Kawasaki Yamaha Suzuki Honda KTM Scooter ATV Dirt Bike
• What is the model number for the Valchoose Magneto Flywheel Puller (24mm&27mm)? The model number for the Valchoose Magneto Flywheel Puller (24mm&27mm) is VM-24.• What is the weight of the Valchoose Magneto Flywheel Puller (24mm&27mm)? The weight of the Valchoose Magneto Flywheel Puller (24mm&27mm) is 1.47kg.
• What is the length of the Valchoose Magneto Flywheel Puller (24mm&27mm)? The length of the Valchoose Magneto Flywheel Puller (24mm&27mm) is 18cm.
• What is the width of the Valchoose Magneto Flywheel Puller (24mm&27mm)? The width of the Valchoose Magneto Flywheel Puller (24mm&27mm) is 6cm.
• What is the height of the Valchoose Magneto Flywheel Puller (24mm&27mm)? The height of the Valchoose Magneto Flywheel Puller (
Why We Like This
• Making Work Effectively Are you always in trouble with the flywheel stator replacement? Trying Valchoose Flywheel Stator Magneto Puller, work like a charm, quick tip, use your impact wrench to break loose, very Easy and Effective!• Fitment Items GY6 50 125 150cc Kawasaki Yamaha Suzuki Honda KTM Scooter ATV Dirt Bike and so on（more fitment information, please read the description below）• 24mm&27mm Double Head Size 24mm/094in side thread use for most GY6 50 4 Stroke Scooter Moped ATV 27mm/106in side thread use for most GY6 125 150cc Scooter and other 125cc Motorcycles• Tips Need the repair tool for removing flywheel to replace the stator Do not forget the flywheel has the correct(left or right) hand thread Rob• Money Back for Not Satisfied If you are not 100% satisfied, we will help you resolve your concern or provide a full refund Don’t hesitate to purchase! Great buy and value!QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool
A motorcycle clutch is a vital component in the bike’s drivetrain, and the lock nut that secures it in place is equally important. If you’re performing any work on your clutch, this QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool is an essential tool to have on hand. It’s designed to loosen and tighten the lock nut for removal and installation of the clutch plate, and can also be used to remove the flywheel or rotor if necessary. This set comes with two sizes of pullers to fit a variety of models, and is made of durable magnetic steel for long-lasting performance. Keep your bike’s drivetrain in top condition with this handy tool.
Common Questions on QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool
• What are the dimensions of this product? The dimensions of the product are 24mm x 27mm x 20mm x 24mm.• What is this product made of? This product is made of durable materials that are designed to last.
• How do I use this product? This product is easy to use. Simply place it over the clutch nut and turn it clockwise to loosen.
• What are the benefits of using this product? This product is an essential tool for anyone who owns a motorcycle, ATV, or dirt bike. It helps to keep your vehicle in good working condition by allowing you to easily remove the flywheel or clutch nut.
• Is this product easy to use? Yes, this product is easy to use. Simply place it over the clutch nut and turn it clockwise to loosen.
Why We Like This
• 2 sizes of flywheel puller for different motorcycles• Magnetic for easy removal of flywheel• Clutch lock tool for easy removal and installation of clutch• Made of durable steel for long lasting use• Includes 1 flywheel puller and 1 clutch lock toolAdditional Product Information
| Color | Black |
| Height | 10.8 Inches |
| Length | 38.4 Inches |
Flywheel Stator Magneto Puller ATV Repair Tool 24mm&27mm for GY6 50CC 125CC 150CC Kawasaki Yamaha KTM Scooter ATV Dirt Bike
We all know how important it is to keep our ATVs in top condition. Not only do they need to be able to handle the demands of off-roading, but they also need to be able to start quickly and easily. That’s why it’s important to have a good quality magneto puller on hand. The Flywheel Stator Magneto Puller is a great option for those looking for an easy to use and durable puller. This puller is made from high quality magnetic steel and is coated with a phosphate layer to resist rust and corrosion. It features both 24mm and 27mm threading, making it compatible with most GY6 50cc and 125/150cc scooters and ATVs. This puller is easy to use and will help you get your ATV up and running in no time. Whether you’re doing some routine maintenance or repairing a more serious issue, the Flywheel Stator Magneto Puller is a great tool to have on hand.
Common Questions on Flywheel Stator Magneto Puller ATV Repair Tool 24mm&27mm for GY6 50CC 125CC 150CC Kawasaki Yamaha KTM Scooter ATV Dirt Bike
• What is the Flywheel Stator Magneto Puller ATV Repair Tool used for? The Flywheel Stator Magneto Puller ATV Repair Tool is used to remove the flywheel or stator from your ATV.• What are the dimensions of the puller? The puller is 24mm in diameter and 27mm in length.
• What is the maximum weight capacity of the puller? The puller can handle a maximum weight of 50CC 125CC 150CC Kawasaki Yamaha KTM Scooter ATV Dirt Bike.
• How do I use the puller? First, remove the screws that hold the flywheel or stator in place. Next, insert the end of the puller into the hole in the flywheel or stator. Finally, turn the knob on the puller to remove the flywheel or stator.
Why We Like This
• 1. Fits GY6 50CC 125CC 150CC Kawasaki Yamaha KTM Scooter ATV Dirt Bike• 2. Double Head Magneto Puller Size: 24mm x 27mm• 3. 24mm right hand thread use for most GY6 50 4 Stroke Scooter Moped ATV• 4. 27mm left hand thread use for most GY6 125 150cc Scooter and other 125cc Motorcycles• 5. Material is magnetic steel ,surface phosphating antirust proc8MILELAKE 10Pcs Motorcycle & ATV Flywheel Puller Compatible for Yamaha Kawasaki Honda Suzuki
The 8MILELAKE 10Pcs Motorcycle & ATV Flywheel Puller Compatible for Yamaha Kawasaki Honda Suzuki is a great tool set for servicing most motorcycles, dirt bikes, and ATVs. The set comes with 15 different pieces that are compatible with many different sizes of flywheels. The set is also very affordable, making it a great option for those on a budget.
Common Questions on 8MILELAKE 10Pcs Motorcycle & ATV Flywheel Puller Compatible for Yamaha Kawasaki Honda Suzuki
• What is the weight of the 8MILELAKE 10Pcs Motorcycle & ATV Flywheel Puller Compatible for Yamaha Kawasaki Honda Suzuki? There is no definitive answer as the weight can vary depending on the specific model. However, the average weight is approximately 2.5 pounds.• What is the flywheel puller used for? The flywheel puller is used to remove the flywheel from the engine.
• How do you use a flywheel puller? First, attach the puller to the flywheel. Then, insert the tool into the center of the flywheel and turn the handle to remove the flywheel.
• What is the warranty on the 8MILELAKE 10Pcs Motorcycle & ATV Flywheel Puller Compatible for Yamaha Kawasaki Honda Suzuki? There is a one-year warranty for this product.
Why We Like This
• • 10 piece flywheel puller set for servicing 15 different applications• For most motorcycles, dirt bikes, and ATVs• Sizes: M14x15, M16x15, M18x15, M26x10, M28x10, M25x15, M22x10, M28x15, M19x10, M26x15, M22x15, M27x125, M20x10, M27x10L, M24x10• Except for M27x10, all pieces are right hand threadAdditional Product Information
| Height | 2.362204722 Inches |
| Length | 10.236220462 Inches |
| Weight | 4.39 Pounds |
Spanner Wrench Fly Wheel Clutch Hub Adjustable Tool And 24mm&27mm Flywheel Stator Magneto Puller Repair Tool for Motorcycle ATV Scooter Dirt Bike Go Kart
This spanner wrench and flywheel clutch hub adjustable tool is perfect for repairing motorcycle ATVs, scooters, dirt bikes and go karts. It is made of high quality iron and magnetic steel for durability and strength, and comes with two sizes of pins to fit different sizes of flywheel slots. This package also includes a double head magneto puller for easy removal of stator magnets.
Common Questions on Spanner Wrench Fly Wheel Clutch Hub Adjustable Tool And 24mm&27mm Flywheel Stator Magneto Puller Repair Tool for Motorcycle ATV Scooter Dirt Bike Go Kart
• What is the purpose of a spanner wrench? A spanner wrench is a tool used to tighten or loosen fasteners, such as nuts and bolts.• What is the purpose of a flywheel? A flywheel is a mechanical device that stores energy and helps keep a engine running smoothly.
• What is the purpose of a clutch? A clutch is a device that helps engage and disengage the power from the engine to the wheels.
• What is the purpose of an adjustable tool? An adjustable tool helps you to easily adjust the size or shape of something.
• What is the purpose of a magneto? A magneto is a device that creates electricity to power the ignition system in an engine.
Why We Like This
• Fits for Motorcycle ATV Scooter Dirt Bike Go Kart• Made of high quality iron• Flywheel Puller is made of magnetic steel• Durable and strong• Package includes: 1 Spanner Wrench, 1 Flywheel PullerAdditional Product Information
| Height | 1.968503935 Inches |
| Length | 5.905511805 Inches |
Benefits of Dirt Bike Flywheel Puller
There are many benefits to using a dirt bike flywheel puller. One of the most beneficial is that it helps improve engine performance by helping the engine rotate more smoothly. This in turn can lead to increased power and torque output from the engine. Additionally, a flywheel puller can help reduce noise levels coming from the engine while also improving fuel economy.Buying Guide for Best Dirt Bike Flywheel Puller
A flywheel puller is a handy tool that makes removing a dirt bike’s flywheel an easy task. There are many different brands and models of flywheel pullers on the market, so it is important to choose the right one for your needs. Here are some tips for choosing the best dirt bike flywheel puller: 1. First, make sure that the model of dirt bike you have is compatible with the flywheel puller. Some pullers are only compatible with certain models or brands of dirt bikes. 2. Second, consider the size of the flywheel you need to remove. Some pullers can accommodate different sizes of flywheels, while others are only designed for specific sizes. Choose a model that will fit your FlyWheel size perfectly. 3rd and lastly, check reviews online before making your purchase. This will help you see what other customers have had to say about a particular model or brand of flywheel puller.Frequently Asked Question
What is the best way to use a dirt bike flywheel puller?
In general, it is recommended that you follow the instructions that come with the flywheel puller to ensure that it is used correctly and safely.
How do I know if my dirt bike flywheel puller is working properly?
There are a few ways to tell if your dirt bike flywheel puller is working properly. One way is to check the threads on the flywheel puller to see if they are stripped or damaged in any way. Another way is to check the flywheel itself to see if it is damaged or if the teeth are stripped.
What are the different types of dirt bike flywheel pullers?
There are several different types of dirt bike flywheel pullers, but the most common are the 3- prong and the 4- prong pullers. The 3- prong puller is typically used for smaller flywheels, while the 4- prong puller is used for larger flywheels. There are also speciality pullers that are made for specific flywheel sizes.
How do I choose the right size dirt bike flywheel puller for my bike?
There are a few things to consider when choosing the right size dirt bike flywheel puller for your bike. Firstly, you need to know the model and make of your bike in order to choose the correct puller. Secondly, you need to consider the size of your bike’s engine. The puller should be compatible with the engine size in order to work correctly. Lastly, you need to make sure that the puller you choose is the correct thread size for your bike.
What are some tips for using a dirt bike flywheel puller?
There are a few tips to using a dirt bike flywheel puller: – Make sure the flywheel is clean before attempting to remove it. – Carefully thread the flywheel puller onto the flywheel. – Once the flywheel puller is secure, turn the flywheel counterclockwise to remove it.