Best Brake Pedal Sensor Switch: A New Way To Improve Your Car’s Safety

A brake pedal sensor switch is a device that is installed on the brake pedal assembly of a vehicle. This switch is used to detect when the brake pedal is depressed and send a signal to the electronic control unit (ECU) to activate the brakes. The brake pedal sensor switch is usually located at the top of the brake pedal and is connected to the ECU via a wiring harness. When the brake pedal is depressed, the switch completes the circuit and sends a signal to the ECU. The ECU then activates the brakes by sending a voltage to the brake actuator.

Why Brake Pedal Sensor Switch Is Necessary?

Brake pedal sensor switches are necessary to ensure that the brakes are applied when the pedal is depressed. This switch is usually located at the top of the brake pedal and is connected to a cable that runs to the brake master cylinder. When the brake pedal is depressed, this switch closes and applies pressure to the master cylinder, which in turn applies pressure to the brakes.

Our Top Picks For Best Brake Pedal Sensor Switch

Best Brake Pedal Sensor Switch Guidance

GM Genuine Parts 22741943 Brake Pedal Position Sensor , Black

GM Genuine Parts 22741943 Brake Pedal Position Sensor , Black

Check Price On Amazon

22741943 Brake Pedal Position Sensor When you need to replace your brake pedal position sensor, GM Genuine Parts has got you covered. This part is designed specifically for your GM vehicle and offers the same quality, reliability, and durability you’ve come to expect from GM. So when it’s time to replace your brake pedal position sensor, don’t settle for anything less than GM Genuine Parts.

Common Questions on GM Genuine Parts 22741943 Brake Pedal Position Sensor , Black

• What is the part number for the GM Genuine Parts 22741943 Brake Pedal Position Sensor? The part number for the GM Genuine Parts 22741943 Brake Pedal Position Sensor is 22741943.
• What does the GM Genuine Parts 22741943 Brake Pedal Position Sensor do? The GM Genuine Parts 22741943 Brake Pedal Position Sensor helps to keep track of the position of the brake pedal.
• How is the GM Genuine Parts 22741943 Brake Pedal Position Sensor installed? The GM Genuine Parts 22741943 Brake Pedal Position Sensor is installed by connecting it to the brake pedal.
• What are the dimensions of the GM Genuine Parts 22741943 Brake Pedal Position Sensor? The dimensions of the GM Genuine Parts 22741943 Brake Pedal Position Sensor are 3.54 inches long, 2.76 inches wide, and 1.38 inches tall.
• What is the weight of the GM Genuine Parts 22741943 Brake Pedal Position Sensor? The weight of

Why We Like This

• 1. GM recommended replacement part.
• 2. Offers the quality, reliability, and durability of GM OE.
• 3. Manufactured with GM Original Equipment specification for fit, form, and function.
• 4. Easy to install.
• 5. Backed by a 12 month, 12,000 mile warranty.

Additional Product Information

ColorBlack
Height1.5 Inches
Length3.3 Inches
Weight0.05 Pounds

GM Genuine Parts 13597425 Brake Pedal Position Sensor

GM Genuine Parts 13597425 Brake Pedal Position Sensor

Check Price On Amazon

If you’re looking for a reliable brake pedal position sensor, look no further than GM Genuine Parts’ 13597425 model. This sensor is designed specifically for GM vehicles, so you can be sure it will fit your car perfectly and function just as well as the original factory component. Plus, with GM’s reputation for quality, you know this sensor will last. So don’t wait any longer, get your GM Genuine Parts brake pedal position sensor today.

Common Questions on GM Genuine Parts 13597425 Brake Pedal Position Sensor

• Which company manufactures the GM Genuine Parts 13597425 Brake Pedal Position Sensor? The GM Genuine Parts 13597425 Brake Pedal Position Sensor is manufactured by General Motors.
• What is the purpose of the GM Genuine Parts 13597425 Brake Pedal Position Sensor? The GM Genuine Parts 13597425 Brake Pedal Position Sensor is used to detect the position of the brake pedal.
• How is the GM Genuine Parts 13597425 Brake Pedal Position Sensor installed? The GM Genuine Parts 13597425 Brake Pedal Position Sensor is installed on the brake pedal.
• What are the dimensions of the GM Genuine Parts 13597425 Brake Pedal Position Sensor? The GM Genuine Parts 13597425 Brake Pedal Position Sensor has the following dimensions: 2.5 x 2.5 x 1.5 inches.
• What is the warranty on the GM Genuine Parts 13597425 Brake Pedal Position Sensor? The GM Genuine Parts 13597425 Brake Pedal Position Sensor comes with a 12 month/12

Why We Like This

• 1. GM recommended replacement part
• 2. Offers the quality, reliability, and durability of GM OE
• 3. Manufactured with GM Original Equipment specification
• 4. Fit, form, and function
• 5. Country of Origin: China

Additional Product Information

Height2.1 Inches
Length4.2 Inches
Weight0.07 Pounds

GM Genuine Parts 25799118 Brake Pedal Position Sensor with Bolts

GM Genuine Parts 25799118 Brake Pedal Position Sensor with Bolts

Check Price On Amazon

Assuming you would like a professional, witty, and clever explanation on GM Genuine Parts 25799118 Brake Pedal Position Sensor with Bolts: GM-recommended replacement part for your GM vehicle’s original factory component. Offering the quality, reliability, and durability of GM OE. Note : Refer to the PDF attached below in Technical Specification for Fitment. The GM Genuine Parts 25799118 Brake Pedal Position Sensor with Bolts helps to ensure that your vehicle maintains the same level of quality and performance as when it first drove off the assembly line. This brake pedal position sensor is manufactured with GM Original Equipment specification for fit, form, and function and provides vital information to the powertrain control module so that it can make adjustments to ensure optimal vehicle performance.

Common Questions on GM Genuine Parts 25799118 Brake Pedal Position Sensor with Bolts

• What is the name of the product? GM Genuine Parts 25799118 Brake Pedal Position Sensor with Bolts
• What is the function of the product? The brake pedal position sensor is used to measure the position of the brake pedal relative to the floor of the vehicle.
• What are the dimensions of the product? The brake pedal position sensor is 3 inches long and 1 inch wide.
• What is the materials of the product? The brake pedal position sensor is made of plastic.
• Where is the product made? The brake pedal position sensor is made in the USA.

Why We Like This

• 1. This is a GM recommended replacement part for your GM vehicle’s original factory component.
• 2. It is made with the quality, reliability, and durability of GM OE.
• 3. Installation is easy as it is a direct fit replacement.
• 4. It is manufactured with GM Original Equipment specification for fit, form, and function.
• 5. It comes with bolts for easy installation.

Additional Product Information

Height1.1 Inches
Length3.3 Inches
Weight0.2 Pounds

GM Genuine Parts 13579089 Brake Pedal Position Sensor

GM Genuine Parts 13579089 Brake Pedal Position Sensor

Check Price On Amazon

A brake pedal position sensor is a device that helps measure how far your foot is from the floor when depressing the brake pedal. The sensor is usually located near the brake pedal itself. When you press the brake pedal, the sensor sends a signal to the electronic control unit (ECU). The ECU then uses that information to determine how much braking force to apply. Brake pedal position sensors are important because they help ensure that the brakes are applied evenly. If one brake were to apply more force than the other, it could cause the vehicle to veer off course. This is why it’s so important to replace a brake pedal position sensor if it becomes damaged or malfunctions. Damage to a brake pedal position sensor can occur in a number of ways. One common way is through exposure to moisture. Over time, moisture can cause the sensor to corrode or rust. This can eventually lead to the sensor becoming cracked or broken. Another common cause of damage to brake pedal position sensors is physical impact. If the sensor is hit by a hard object, it can become damaged or dislodged. This can cause the sensor to stop working properly or, in some cases, fall off entirely. If your brake pedal position sensor becomes damaged or

Common Questions on GM Genuine Parts 13579089 Brake Pedal Position Sensor

• What is GM Genuine Parts 13579089 Brake Pedal Position Sensor? The GM Genuine Parts 13579089 Brake Pedal Position Sensor is a sensor that is used to determine the position of the brake pedal.
• How is the GM Genuine Parts 13579089 Brake Pedal Position Sensor used? The GM Genuine Parts 13579089 Brake Pedal Position Sensor is used to determine the position of the brake pedal.
• What are the benefits of using the GM Genuine Parts 13579089 Brake Pedal Position Sensor? The GM Genuine Parts 13579089 Brake Pedal Position Sensor is used to determine the position of the brake pedal, which can be helpful in avoiding accidents.
• Where can I find the GM Genuine Parts 13579089 Brake Pedal Position Sensor? The GM Genuine Parts 13579089 Brake Pedal Position Sensor is available at most auto parts stores.
• How do I install the GM Genuine Parts 13579089 Brake Pedal Position Sensor? The GM Genuine Parts 13579089 Brake Pedal Position Sensor is easy to install and comes with instructions.

Why We Like This

• 1. GM recommended replacement part for your GM vehicle
• 2. Offering the quality, reliability, and durability of GM OE
• 3. Manufactured with GM Original Equipment specification for fit, form, and function
• 4. Country of Origin: China
• 5. Brake pedal position sensor for your GM vehicle

Additional Product Information

Height1.6 Inches
Length3.3 Inches
Weight0.06 Pounds

GM Genuine Parts 13583374 Brake Pedal Position Sensor

GM Genuine Parts 13583374 Brake Pedal Position Sensor

Check Price On Amazon

If you’re looking for a replacement brake pedal position sensor for your GM vehicle, look no further than the GM Genuine Parts 13583374. This GM-recommended sensor is designed to match the quality, reliability, and durability of your vehicle’s original factory component. It’s manufactured with GM Original Equipment specification for fit, form, and function, so you can be sure it will perform just as well as the original did. Plus, it comes with a hassle-free limited warranty. So if you’re in need of a new brake pedal position sensor, the GM Genuine Parts 13583374 is the way to go.

Common Questions on GM Genuine Parts 13583374 Brake Pedal Position Sensor

• What is the part number for the GM Genuine Parts Brake Pedal Position Sensor? The part number is 13583374.
• What does the GM Genuine Parts Brake Pedal Position Sensor do? The sensor helps to monitor the brake pedal position and sends a signal to the electronic brake control module to activate the brakes.
• Where is theGM Genuine Parts Brake Pedal Position Sensor located? The sensor is located on the brake pedal itself.
• What are the symptoms of a failing GM Genuine Parts Brake Pedal Position Sensor? The symptoms can include the brakes not working properly, the brake warning light coming on, and the ABS system not working.
• How do you replace the GM Genuine Parts Brake Pedal Position Sensor? The sensor is located on the brake pedal itself and can be replaced by removing the old sensor and installing the new one in its place.

Why We Like This

1. GM recommended replacement part for your GM vehicle’s original factory component 2. Offering the quality, reliability, and durability of GM OE 3. Manufactured with GM Original Equipment specification for fit, form, and function 4. Easy to install 5. Affordable

Additional Product Information

Height1.6 Inches
Length3.6 Inches
Weight0.06 Pounds

Benefits of Brake Pedal Sensor Switch

Assuming you would like an article discussing the benefits of brake pedal sensors: Brake pedal sensors are devices that are fitted to a vehicle’s brakes that measure the pressure exerted on the brake pedal. The output from the sensor is used to provide an early warning of impending braking problems, such as excessive wear on the brake pads. There are many benefits to having a brake pedal sensor fitted to your vehicle. The main benefit is that they can help warn you of impending braking problems, giving you time to fix them before they cause any major damage or safety issues. They can also help improve your fuel economy by helping you avoid unnecessary braking.

Buying Guide for Best Brake Pedal Sensor Switch

When it comes to choosing the best brake pedal sensor switch, there are a few things you need to keep in mind. The most important factor is the compatibility with your car’s make and model. Make sure to check the specifications before buying a brake pedal sensor switch. Another important factor is the quality of the product. A good quality brake pedal sensor switch will last longer and provide a smoother braking experience. Finally, consider the price of the brake pedal sensor switch. Choose one that fits your budget but also provides good value for money.

Frequently Asked Question

What is a brake pedal sensor switch?

A brake pedal sensor switch is a switch that is mounted on the brake pedal. This switch is used to detect when the brake pedal is depressed and send a signal to the electronic control unit (ECU). The ECU then controls the braking system accordingly.

How does a brake pedal sensor switch work?

The brake pedal sensor switch is a device that is mounted on the brake pedal. It is connected to the brake light switch and the stop light switch. When the brake pedal is depressed, the switch closes and the brake lights come on. When the pedal is released, the switch opens and the brake lights go off.

What are the benefits of using a brake pedal sensor switch?

A brake pedal sensor switch is a device that is installed on the brake pedal of a vehicle. The device senses when the brake pedal is depressed and sends a signal to the vehicle’s computer. The computer then activates the brake lights. The device can also be used to deactivate the cruise control system when the brake pedal is depressed.

What are some of the top-rated brake pedal sensor switches?

Some of the top-rated brake pedal sensor switches are the Dorman 901-107, the ACDelco 15-71761, and the Raybestos PGD1170C.

How do I install a brake pedal sensor switch?

If your car has an ABS system, there will be a brake pedal sensor switch located under the dash, near the brake pedal. This switch is responsible for telling the ABS system when the brake pedal is depressed. To install this switch, first disconnect the battery. Then, remove the old switch by unscrewing it from the pedal assembly. Install the new switch by screwing it into place. Reconnect the battery, and test the switch by depressing the brake pedal.

Conclusion

Your search for the best brake pedal sensor switch ends here! This top-of-the-line product is exactly what you need to improve your braking system. With its precision design and durable construction, this brake pedal sensor switch will give you years of reliable performance.

Leave a Comment