There are a few different ways you can tension a v-belt, but using a tensioner is the best way. Tensioners apply even pressure to both sides of the belt which keeps it from slipping. You can buy a tensioner tool or make one yourself.
To make a tensioner tool, you’ll need a piece of flat metal (like an old school ruler) and two small nails. Hammer the nails into the metal so they’re pointing in opposite directions. Then, wrap the metal around the belt so that the nails are on either side of the belt. Squeeze the metal together to tighten the belt. You may need to readjust the nails to get the right tension.
If you don’t have any tools on hand, you can use your hands to tension the belt. Just grab each side of the belt and pull it in opposite directions. Be careful not to stretch the belt too much or it will break.
Why V Belt Tensioner Tool Is Necessary?
V belt tensioners are necessary to keep your vehicle’s engine running smoothly. V belts are used to transfer power from the engine to the accessories, and if they are not properly tensioned, they can slip and cause the engine to lose power. V belt tensioners help keep the belts tight so that they do not slip, ensuring that your vehicle’s engine receives the full power it needs.Our Top Picks For Best V Belt Tensioner Tool
Best V Belt Tensioner Tool Guidance
Browning 1302546 Belt Tension Checker, Steel
It is important to ensure that your Browning 1302546 belt tension checker is in good working order to avoid premature belt wear. This compact, spring-loaded design is easy to operate, with instructions included. It is adjustable for 10″ to 170″ belt span and up to 35 pounds of tension.
Common Questions on Browning 1302546 Belt Tension Checker, Steel
• What is the maximum width that can be measured with this tension checker? The maximum width that can be measured with this tension checker is 130 mm.• How do you use this tension checker? First, you need to set the pointer to the zero position. Then, you need to put the checker on the belt and push the slider until it contacts the belt. After that, you can read the value on the gauge.
Why We Like This
• 1) Compact, spring loaded design• 2) Easy to operate• 3) Adjustable for 10″ to 170″ belt span• 4) Up to 35 pounds of tension• 5) Proper tensioning is necessary to avoid premature belt wearGates 7401-0076 Pencil Type Tension Tester, 30 lbs Deflection Force
If you’re looking for an easy way to test the tension of small V-belts and synchronous belts, the Gates 7401-0076 Pencil Type Tension Tester is a great option. With a maximum deflection force of 30 lb, this single-barrel tension tester ensures that your belt is properly tensioned for increased life. Simply attach the tester to the belt and check the gauge to see if the belt is within the proper range. If not, adjust accordingly and re-test. This tension tester is made in the USA and backed by Gates’ quality guarantee.
Common Questions on Gates 7401-0076 Pencil Type Tension Tester, 30 lbs Deflection Force
• What is the maximum deflection force for this tension tester? The maximum deflection force is 30 lbs.• What is the minimum deflection force for this tension tester? There is no minimum deflection force listed for this tension tester.
• How many times can the deflection force be repeated? The deflection force can be repeated up to five times.
Why We Like This
1. Single barrel tension tester for use with small V belts and synchronous belts. 2. Maximum deflection force of 30 lb. 3. Ensures proper belt tension for increased life of drive belt. 4. Lightweight and easy to use. 5. Made in the USA.Additional Product Information
| Height | 11 Inches |
| Length | 8 Inches |
| Weight | 0.2 Pounds |
ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read
The ABN Belt Tension Gauge is designed to help you set accurate vehicle belt tension. It works with all belt drive models with a 10-pound specification and includes a scale for easy measurement. The L-shaped pad on the gauge fits all belt sizes, making it ideal for use after wheel service or belt replacement/adjustment.
Common Questions on ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read
• What are the dimensions of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read? The dimensions of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read are as follows: Length: 10 inches Width: 2.5 inches Height: 1.5 inches• What is the maximum weight capacity of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read? The maximum weight capacity of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read is 10 pounds.
• What is the minimum weight capacity of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read? The minimum weight capacity of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read is 0 pounds.
• What is the weight capacity increment of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read? The weight capacity increment of the ABN Belt Tension Gauge – Universal, 10 lbs Specification, Easy to Read
Why We Like This
The ABN Belt Tension Gauge is designed to help set accurate vehicle belt tension. The gauge is versatile and works with all belt drive models that have a 10 pound specification. The scale on the gauge makes it easy to take accurate measurements. The L shaped pad on the gauge fits all belt sizes. The gauge is ideal for use after wheel service or belt replacement/adjustment.Additional Product Information
| Color | Yellow |
| Height | 7.79921259047 Inches |
| Length | 2.90157480019 Inches |
| Weight | 0.1763698096 Pounds |
Gates 91107 Krikit V-Belt Tension Gauge, Black
If you’ve ever been stuck in traffic behind a car with a squealing belt, you know how important it is to keep your belts tight. The Gates 91107 Krikit V-Belt Tension Gauge is a handy tool for making sure your belts are at the proper tension. This gauge measures tension from 30 to 160 lb, and 15 to 75 kg. The die-cast aluminum body and nylon indicator arm are built to last, and the stainless steel pocket clip means you can always have it with you when you need it.
Common Questions on Gates 91107 Krikit V-Belt Tension Gauge, Black
• What is the Gates 91107 Krikit V-Belt Tension Gauge, Black? The Gates 91107 Krikit V-Belt Tension Gauge is a device used to measure the tension of a v-belt.• How is the Gates 91107 Krikit V-Belt Tension Gauge, Black used? The device is placed on the belt and a spring is used to measure the tension.
• Why is the Gates 91107 Krikit V-Belt Tension Gauge, Black necessary? The gauge is necessary in order to ensure that the belt is tight enough, but not too tight.
• How often should the Gates 91107 Krikit V-Belt Tension Gauge, Black be used? The gauge should be used every time the belt is tightened or loosened.
• What are the proper tension values for the Gates 91107 Krikit V-Belt Tension Gauge, Black? The proper tension values will vary depending on the application.
Why We Like This
1. The Gates 91107 Krikit V Belt Tension Gauge is a precision tool that allows you to accurately measure tension on V belts. 2. The gauge has a die cast aluminum body and a nylon indicator arm for durability and long life. 3. The pressure pad on the gauge is adjustable, so you can get a precise measurement every time. 4. The gauge fits in your pocket, and has a stainless steel pocket clip for easy carrying. 5. This tension gauge is perfect for ensuring proper tension on your V belts, and preventing premature belt failure.Additional Product Information
| Color | Black |
| Height | 1 Inches |
| Length | 5 Inches |
| Weight | 0.03 Pounds |
Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included – 648629
If you’re looking for an easy way to remove and install serpentine belts on vehicles with spring-loaded belt tensioners, then you need the Powerbuilt Serpentine Belt Tool Set. This set comes with everything you need to get the job done quickly and easily, including accessories for specific vehicle applications. The set also comes with a heavy duty blow molded case to keep everything organized and protected. Plus, the case includes usage instructions and photos to make things even easier.
Common Questions on Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included – 648629
• What is the best way to use the Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included – 648629? The best way to use the Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included – 648629 is to follow the instructions included with the product.• What are the benefits of using the Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included – 648629? The benefits of using the Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included – 648629 include the ability to remove and install car Serpentine belts quickly and easily, as well as the included storage case for easy transportation and storage.
Why We Like This
• For removing and installing serpentine belts on vehicles with spring loaded belt tensioners• Includes accessories for specific vehicle applications, including GM, Ford, Chrysler, SAAB, VW and Volvo• Complete accessory kit included for multi vehicle applications• Heavy duty blow molded case to keep set protected and organized• Includes detailed usage instruction with photosAdditional Product Information
| Color | Silver |
| Height | 2.13 Inches |
| Length | 4 Inches |
Benefits of V Belt Tensioner Tool
The best v belt tensioner tool can help you to easily and quickly tension your vehicle’s V belts. This can save you time and money by avoiding the need to take your vehicle to a mechanic. It is also a good idea to have this tool handy in case you ever need to replace a worn or damaged belt.Buying Guide for Best V Belt Tensioner Tool
There are many factors to consider when purchasing a v belt tensioner tool. This guide will help you choose the best one for your needs. First, consider the type of vehicle you have. Some v belt tensioner tools are designed for specific types of vehicles. Make sure you get the right one for your car or truck. Next, think about the size of your vehicle’s engine. The bigger the engine, the more powerful the tool should be. Choose a model that’s rated for your engine size. Then, decide how often you’ll need to use the tool. If you only plan on using it occasionally, a less expensive model might be all you need. Or, if you use it frequently, spend a little more to get a higher quality tool that will last longer. Finally, read online reviews before making your purchase. This will help you see what other users think about different models and brands so you can make an informed decision about which one is right for you.Frequently Asked Question
What are the different types of v belt tensioner tool?
There are three main types of v belt tensioner tools: hand-held tensioners, pneumatic tensioners, and hydraulic tensioners. Hand-held tensioners are the most common and least expensive type of tensioner. Pneumatic tensioners are more expensive but are much easier to use. Hydraulic tensioners are the most expensive but are the most powerful and can be used on very heavy duty belts.
What are the features of a good v belt tensioner tool?
The features of a good v belt tensioner tool are that it is durable, easy to use, and adjustable.
How do you use a v belt tensioner tool?
To use a v belt tensioner tool, you first need to locate the tensioner pulley. This pulley is usually located at the end of the engine, near the alternator. Once you have located the tensioner pulley, you will need to place the tool on the pulley and turn it clockwise. This will tighten the v belt and help to keep it from slipping.
What are the benefits of using a v belt tensioner tool?
There are many benefits to using a v belt tensioner tool. Some of the benefits include: 1. Ensuring that the v belt is properly tensioned2. Making it easier to install and remove the v belt3. Helping to prolong the life of the v belt4. Reducing vibration and noise5. Improving the overall performance of the engine
What are the different brands of v belt tensioner tool?
There are many different brands of v belt tensioner tools on the market. Some of the more popular brands include: Gates, Bando, Dayco, Goodyear, and Continental.