Are you in the market for a plasma cutter but don’t know where to start? You’re not alone. With all of the different brands and models on the market, it can be tough to decide which one is right for you.
One important factor to consider when choosing a plasma cutter is pilot arc technology. Pilot arc technology makes it easier to cut thicker materials by using a high-frequency electromagnetic field to ionize the air between the electrode and the nozzle. This creates a conductive path that allows for a more efficient transfer of energy from the machine to the material being cut.
torch with pilot arc technology will have two nozzles: a primary nozzle that emits the plasma arc and a secondary nozzle that emits an ionizing gas. When thetrigger is activated, the ionizing gas is emitted first, followed by the plasma arc. The ionizing gas helps to create a conductive path between the electrode and the material being cut, which makes it easier to cut thicker materials.
Why Pilot Arc Plasma Cutter Is Necessary?
Pilot arc plasma cutters are necessary for cutting through thick materials, such as stainless steel. The pilot arc allows for a much hotter cut, making it possible to cut through thicker materials with ease. Plasma cutting is also much cleaner and more precise than other methods of cutting, so it is perfect for projects that require a high degree of accuracy.Our Top Picks For Best Pilot Arc Plasma Cutter
Best Pilot Arc Plasma Cutter Guidance
Pilot arc plasma cutters are a type of cutting machine that use a high-frequency, non-touch arc starting mode. This means that the torch head does not need to physically touch the metal plate in order to start the arc, and can instead be held slightly above it. This can greatly extend the working life of consumables and increase the cutting thickness. Pilot arc plasma cutters are also dual-voltage, meaning they can automatically switch between 110v and 220v power sources. This is indicated by a voltage indicator on the front panel of the machine. The machine is equipped with a current display and a regulator/gauge combo. This allows you to easily read the air pressure value and adjust it accordingly. We recommend an air pressure value between 40-70 PSI. There is also an air filter installed on the rear of the machine with a quick air connector. The plasma cutter has a post time function that allows you to extend or shorten the cooling time of the torch head. This is useful for when you need to cool the head down after extended use. The recommended cooling time is 4-8 seconds.
Common Questions on Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps Plasma Cutter 110/220V Dual Voltage Plasma Cutting Machine Clean Cut(BTC500DP 110/220)
• What is the weight of the machine? The machine weighs 35 pounds.• What is the dimensions of the machine? The machine is 19.1 inches by 11.8 inches by 5.9 inches.
• What is the duty cycle of the machine? The machine has a duty cycle of 60%.
Why We Like This
• Pilot arc function for extended torch and consumable life• Automatic dual voltage 110/220V• Regulator and gauge for air pressure control• Post time function for torch head cooling• Maximum cutting thickness of 12mm (110V) or 16mm (220V)Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown is an excellent plasma cutter for those who need a reliable and affordable machine. It has a 50 amp output, which is perfect for cutting through thicker materials. The pilot arc feature allows you to cut without touching the tip to the metal, which makes it great for cutting through rough, painted, or rusty surfaces. TheCutting quality and longer consumable life. It also has a handle for portability and uses non-hazardous compressed air to cut, making it safe and at low cost. We offer a 3-year warranty and our customer service is available to assist you.
Common Questions on Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
• What are the dimensions of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter? The dimensions of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter are 12.2 x 8.5 x 5.5 inches.• What is the weight of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter? The weight of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter is 10.1 pounds.
• What is the maximum cutting thickness of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter? The maximum cutting thickness of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter is 1/2 inch.
• What is the power source of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter? The power source of the Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter is dual voltage 110V/220V.
• What is the warranty of the L
Why We Like This
• Non Touch Pilot Arc Plasma Cutter• Dual Voltage 110V/220V• 50Amp Output• 1/2 Inch Clean Cut• Automatic Dual Voltage/Frequency• PAPST Advanced German Cooling SystemAdditional Product Information
| Color | Brown |
| Height | 12 Inches |
| Length | 15 Inches |
| Weight | 19.4 Pounds |
Pilot arc plasma cutters are a type of plasma cutter that use a pilot arc to strike an arc between the electrode and the work piece. The pilot arc allows for a more stable arc and increased cutting speed. PLC-50DP is a 50amp pilot arc plasma cutter that can cut up to 14mm thick metal. It has a dual voltage input of 110/220V and comes with 4m of AG60P pilot arc cutting torch, earth clamp, 2m air hose, air regulator, and 110V power plug.
Common Questions on hynade Pilot Arc Plasma Cutter, PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Digital Plasma Cutter, DC Inverter 110/220V Dual Voltage Cutting Machine (PLC-50DP)
• What is the dimensions of the PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Plasma Cutter? The dimensions of the PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Plasma Cutter are as follows: Length – 14.5 inches, Width – 8.8 inches, and Height – 6.3 inches.• What is the weight of the PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Plasma Cutter? The weight of the PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Plasma Cutter is 26.4 pounds.
• What is the duty cycle of the PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Plasma Cutter? The duty cycle of the PLC-50DP 50Amp High Frequency Non-Touch Pilot Arc Plasma Cutter is 60% at 50 amps.
Why We Like This
• 1. Pilot arc function for easy arc starting• 2. Dual voltage 110/220V• 3. severance max cutting thickness is 14mm• 4. quality cutting thickness is 10mm• 5. post time function for cooling torch and consumablesPlasma cutters are used in a variety of industries for cutting through metals. They is a type of cutter that uses a plasma torch to cut through electrically conductive materials. The plasma torch is created by an arc between an electrode and the workpiece. This arc is then used to ionize a gas, which creates a plasma jet. The plasma jet is directed at the workpiece, which melts and vaporizes the material. There are two types of plasma cutters: pilot arc plasma cutters and non-pilot arc plasma cutters. Pilot arc plasma cutters use an arc to preheat the gas before it is ionized. This helps to create a more consistent plasma jet and results in a better cut. Non-pilot arc plasma cutters do not use an arc to preheat the gas. These cutters are typically smaller and more portable than pilot arc plasma cutters. Pilot arc plasma cutters have a number of advantages over non-pilot arc plasma cutters. They can cut through thicker materials, they produce less slag, and they have a more consistent cut. However, they are more expensive than non-pilot arc plasma cutters. FC550DP is a non-pilot arc plasma
Common Questions on Plasma Cutter with Pilot Arc, 50A Plasma Cutting Machine Dual Voltage 110/220V Plasma Cutter Equipment Inverter Technology 50/60Hz Clean Cutting Thickness 14mm (FC550DP)
• What is the best way to cut through thicker materials? The best way to cut through thicker materials is with a plasma cutter with pilot arc. This machine is able to cut through materials up to 14mm thick with ease.• What is the dual voltage feature on this machine? The dual voltage feature on this machine allows it to be used with both 110 and 220 volt power supplies.
• What is the clean cutting feature on this machine? The clean cutting feature on this machine helps to prevent the formation of slag on the material being cut.
Why We Like This
• Inverter technology high frequency arc initiation• Dual voltage 115/230V• Quality cutting thickness for steel is 10mm#65PSI(065Mpa) 230V 50Amps• Max cutting thickness 16mm#65PSI 230V 50Amps• 110V power plug with 1 pc wire adaptor from 110V to 220V plug
If you’re looking for a versatile and powerful plasma cutter that can handle a variety of materials, the YESWELDER CUT-55DS is a great option. With a DC output of 10-55A, it can easily cut through stainless steel, alloy steel, mild steel, copper, and aluminum. And with a 60% duty cycle, it can handle even the most demanding jobs. Plus, the CUT-55DS is ETL certified for added safety.
Common Questions on YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
• What is the weight of the YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved? The weight of the YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved is 15.4 lbs.• What are the dimensions of the YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved? The dimensions of the YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved are 23.6″ x 12.2″ x 9.1″. • What
Why We Like This
• 1. Non Touch Pilot Arc technology for minimal slag and more efficient cutting• 2. Powerful Cutting Ability (10 55A DC output)• 3. Lightweight and Portable (13lbs)• 4. Added Safety (ETL certificated)• 5. Built in Post Flow for extended consumable lifeBenefits of Pilot Arc Plasma Cutter
A good plasma cutter is a versatile tool that can be used for a variety of tasks, from cutting thicker metal sheets to precise welding and fabricating. Plasma cutters use an electrically charged gas to cut through metal, which makes them much faster and more efficient than traditional methods like saws or torches. There are many different brands and models of plasma cutters on the market, so it’s important to do your research before buying one. In general, the best plasma cutter will have a higher duty cycle (the percentage of time it can be used continuously without overloading), meaning it can handle tougher jobs for longer periods of time. It will also have adjustable settings so you can customize the speed, power, and focus of the arc for different projects. And finally, make sure to buy a model with built-in safety features like thermal overload protection to prevent accidents.Buying Guide for Best Pilot Arc Plasma Cutter
When it comes to plasma cutters, the best pilot arc plasma cutter is one that can handle any job you throw at it. It should be durable and powerful, yet easy to use. Here are a few things to look for when shopping for a plasma cutter: -Power: The best pilot arc plasma cutter will be able to handle any job you need it to, whether it’s cutting through thick metal or delicate work. Look for a model that has at least 50 amps of power. -Durability: A good plasma cutter should be built to last. Some models are made with quality materials that can withstand years of use. -Ease of Use: The best pilot arc plasma cutter will be easy to set up and use. Look for a model with an intuitive control panel and clear instructions. -Versatility: A good plasma cutter should be versatile enough to handle a variety of jobs. Look for a model that can cut through different thicknesses of metal and has different settings for different applications.Frequently Asked Question
What are the best plasma cutter brands?
The best plasma cutter brands are Lincoln Electric, Miller Electric, and Hobart.
What are the best plasma cutter models?
Some of the most popular plasma cutter models include the Lincoln Electric Power MIG 210 MP, the Miller Electric Spectrum 625 X-treme, and the Thermal Dynamics Cutmaster 60i.
What are the best plasma cutter features?
Some commonly cited features that users look for in a plasma cutter include a high cutting speed, good cutting quality, easy operation, and a durable build.
What are the best plasma cutter benefits?
There are many benefits of plasma cutting, but some of the best benefits include the following: -Plasma cutting is much faster than traditional methods like oxy-fuel cutting.-Plasma cutting produces a much cleaner and smoother cut edge than traditional methods.-Plasma cutting can be used on a wide range of materials, including metals of all thicknesses.-Plasma cutting is a very versatile and precise cutting method.-Plasma cutting is a relatively safe cutting method when proper safety precautions are taken.
What are the best plasma cutter tips?
There are a few different ways to get the most out of your plasma cutter, and each one will help you to achieve better results. First, be sure to invest in a quality cutter that is designed for the material you will be cutting. Second, practice on scrap material before cutting your project piece to get a feel for the cutter and how it works. Third, use a guide to help you make straight cuts, and be sure to use the proper safety equipment when operating the cutter. Finally, take your time and be patient when cutting, as rushing the process can lead to mistakes.