A harmonic balancer is a pulley mounted to the end of the crankshaft of an engine. Its purpose is to cancel out the vibrations caused by the pistons as they move up and down in the cylinders. The harmonic balancer also serves as a weight, which helps to maintain balance in the engine.
The harmonic balancer puller is a tool that is used to remove the harmonic balancer from the crankshaft. It is a very simple tool that consists of a handle and a bolt. The handle is attached to the bolt, and the other end of the bolt is threaded into the center of the harmonic balancer.
To use the harmonic balancer puller, simply place the tool over the harmonic balancer and turn the handle clockwise. This will cause the bolt to thread into the center of the harmonic balancer and pull it off of the crankshaft.
Why Harmonic Balancer Puller Installer Is Necessary?
A harmonic balancer puller installer is a tool that is used to remove and install the harmonic balancer on a vehicle. The harmonic balancer is an important component of the engine, and it helps to keep the engine running smoothly. If the harmonic balancer becomes damaged or worn out, it can cause the engine to vibrate and shake, which can lead to serious damage. The best way to avoid this type of damage is to use a quality harmonic balancer puller installer tool.Our Top Picks For Best Harmonic Balancer Puller Installer
Best Harmonic Balancer Puller Installer Guidance
Are you looking for a comprehensive tool set that will allow you to easily remove and install harmonic balancers? If so, consider the Powerbuilt Harmonic Balancer Puller and Installer Tool Set. This kit includes everything you need to safely and efficiently remove and install harmonic balancers on many different makes and models of cars and light trucks. The removal pieces include a combo yoke, national fine center screw, center point piece, and bolt pairs. The installation pieces include a national fine center screw, thrust bearing, forcing nut, and jaw nut. The kit also includes adapters for M12-15, M14-15, M16-20, 7/16-Inch-20, 1/2-Inch-20, 9/16-Inch-18, and 3/416. The Powerbuilt Harmonic Balancer Puller and Installer Tool Set is built to exceed tool standards and is strong and dependable enough to last a lifetime. So, if you’re in the market for a high-quality, durable, and easy-to-use tool set for removing and installing harmonic balancers, look no further than the Powerbuilt Harmonic Balancer Puller and Installer Tool Set.
Common Questions on Powerbuilt Harmonic Balancer Puller and Installer Tool Set, Install and Remove Kit, Cars and Light Trucks, Storage Case – 648637
• What is the name of the company that makes this product? The company that makes this product is Powerbuilt.• What type of vehicle is this product designed for? This product is designed for cars and light trucks.
• What is included in this set? This set includes a harmonic balancer puller and installer tool, a storage case, and an instruction manual.
• How do you use this product? To use this product, first follow the instructions in the included manual. Then, use the harmonic balancer puller tool to remove the old harmonic balancer from the vehicle. Next, install the new harmonic balancer using the installer tool. Finally, secure the harmonic balancer in place with the included bolts and nuts.
Why We Like This
• Strong and dependable enough to last a lifetime• Kit services many automobiles and light trucks• Tool set for removal and installation of harmonic balancers that have threaded holes• Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs• Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nutAdditional Product Information
| Color | Silver |
| Height | 10.25 Inches |
| Length | 2.875 Inches |
| Weight | 7.15 Pounds |
The OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer is a professional grade installer kit that includes extra long forcing screws for hard to reach balancer pulleys. This installer kit is perfect for a wide variety of V8 and V6 vehicles, including GM, Dodge, Chrysler, and Jeep models. With this convenient installer kit, you can save over $600 on car repairs, as well as save time by not waiting for repairs at the auto shop.
Common Questions on OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys
• What is the OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer used for? The OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer is used to install harmonic balancers and pulleys on hard to reach places.• Where can I find the product manual? The product manual can be found on the OEMTOOLS website.
• How do I know if the product is compatible with my vehicle? Please refer to the product manual for compatibility information.
• What are the extra long forcing screws for? The extra long forcing screws are for hard to reach balancer pulleys.
Why We Like This
• 1. The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles; M16 x 20 mm (GM), M14 x 15 mm (Dodge, Chrysler, and Jeep), M12x 175 mm (Dodge Chrysler, and Jeep), and M12 x 15 mm (Ford).• 2. Car repairs can be expensive; By using this harmonic balancer installer, you will be saving over $600; You can also save time with this balancer installation tool by not waiting for repairs at the auto shop.• 3. All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store; Never worry about losing pieces with this harmonic balancer puller set.• 4. The three puller arms have a significant bite to grip and remove pressed on harmonic balancers; This harmonic balancer puller kit both reduces the risk of stripping threads inside the crankshaft and the risk of breaking crank bolts.• 5. Assemble the threaded rod nut bearing with the bearing facing away from the hex; Insert the threaded rod through the balancer and fastener into the crankshaft; Hold the hexAdditional Product Information
| Color | Red |
| Height | 2.7 Inches |
| Length | 10.2 Inches |
| Weight | 0.61 Pounds |
A professional, witty and clever explanation on the Acymner Harmonic Balancer Puller Set | 46PCS Power Steering Pulley Puller Installer Tool Set, Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set. Durable Material: Heat-treated carbon steel ensures maximum strength; Chrome and black oxide finishes resist rust and corrosion; Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization. 4-Way Slotted Gear Puller Set: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation 9mm thickness, 37mm× 11mm hole size, 93mm Max span. Easy Operation: Look for threaded holes in the wheel hub assembly These holes are designed to be used by the puller for removal Attach the steering wheel puller using the appropriate bolts As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it. Application: The balancer puller can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft
Common Questions on Acymner Harmonic Balancer Puller Set | 46PCS Power Steering Pulley Puller Installer Tool Set, Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set
• What is the Acymner Harmonic Balancer Puller Set | 46PCS Power Steering Pulley Puller Installer Tool Set, Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set? The Acymner Harmonic Balancer Puller Set | 46PCS Power Steering Pulley Puller Installer Tool Set, Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set is a tool set designed to remove steering wheels, flywheels, and crankshaft pulleys.• What are the included pieces? The set includes a flywheel remover, crankshaft pulley removal tool, and steering wheel puller.
• How does it work? The flywheel remover is inserted into the hole in the center of the flywheel. The crankshaft pulley removal tool is then attached to the flywheel remover. The steering wheel puller is then attached to the crankshaft pulley removal tool. The entire assembly is then turned clockwise until the steering wheel, flywheel, and crankshaft pulley are removed. Q
Why We Like This
• Durable Material: Heat treated carbon steel ensures maximum strength; Chrome and black oxide finishes resist rust and corrosion; Heavy duty blow molded carrying case provides easy transportation, safe storage, and quick organization.• 4 Way Slotted Gear Puller Set: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation 9mm thickness, 37mm× 11mm hole size, 93mm Max span.• Easy Operation: Look for threaded holes in the wheel hub assembly These holes are designed to be used by the puller for removal Attach the steering wheel puller using the appropriate bolts As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it.• Application: The balancer puller can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3 hole application.• Package Included: 1pc yoke, different size of bolts, 3pcs 3The ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit is a versatile and practical toolkit that allows you to safely remove harmonic balancers and drive pulleys without damaging your vehicle. The kit also includes adapters to fit a variety of metric and fractional bolts, as well as steering wheels and gear pulleys. The heavy-duty 3/4″ diameter forcing screw is internally threaded to fit the eight adapters, and the black screws are M10 x 15 x 35mm, M8 x 125 x 45mm, M8 x 125 x 65mm, and M8 x 125 x 90mm. The silver screws are UNC 3/8” x 2”, UNC 5/16” x 6”, UNC 5/16” x 3-1/2”, UNF 5/16” x 3”, UNF 3/8” x 1-1/2”, UNF 1/4″ x 2-1/2”, UNC 3/8” x 3”, UNC 3/8” x 4-1/2”, and UNC 3/8” x 2”. The kit comes in a
Common Questions on ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set
• What is included in the ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit? This kit includes a master balancer and pulley removal/installation set, a harmonic balancer puller, an installation tool, and 49 install/removal adapters.• What are the dimensions of the ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit? This kit has a 9.5 x 6.7 x 3 inches (24.1 x 17 x 7.6 cm) case with a 3.2 x 2.6 x 1.5 inches (8.1 x 6.6 x 3.8 cm) master balancer.
• How much does the ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit weight? The kit itself weighs 5.4 pounds (2.4 kg). • What is the ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit used for? This kit is used for removing and installing harmonic balancers and pulleys on vehicles.
Why We Like This
• Can safely remove harmonic balancers and drive pulleys without damaging your vehicle• Also works on gear pulleys and steering wheels• Adapters fit L98 & LT series engines, GM LS1 with aftermarket 3 bolt style balancer• Heavy duty 3/4″ diameter forcing screw internally threaded to fit the eight adapters• Black screws M10 x 15 x 35mm, M8 x 125 x 45mm, M8 x 125 x 65mm, M8 x 125 x 90mm; Silver screws UNC 3/8” x 2”, UNC 5/16” x 6”, UNC 5/16” x 3 1/2”, UNF 5/16” x 3”, UNF 3/8” x 1 1/2”, UNF 1/4″ x 2 1/2”, UNC 3/8” x 3”, UNC 3/8” x 4 1/2”, UNC 3/8” x 2”• Heavy duty 13” x 95” x 25” (33cm x 241cm x 64cm) plastic blowAdditional Product Information
| Height | 2.25196850164 Inches |
| Length | 12.99999998674 Inches |
| Weight | 8.5098433132 Pounds |
Whether you’re a seasoned mechanic or a DIYer, the Orion Motor Tech Harmonic Balancer Puller Kit is a must-have for anyone who works on cars. This engine repair tool is specifically designed for quick and easy removal of pressed-on balancers with a single center retainer bolt, without the need to disassemble the radiator. The kit comes with a unique 3-jaw puller for a firm and secure grip, a pressure screw fitted for 24 mm drive tools that easily centers up to drive the rods, and four forcing rods (3-7/8″, 5-1/5″, 6-1/3″, 7-3/5″) to keep your work fast and efficient. Constructed from structural-grade AISI 1045 medium carbon steel for superior strength, the parts in this kit are also coated with a cataphoretic electro-coating for corrosion-resistant durability and longevity. The Orion Motor Tech Harmonic Balancer Puller Kit is compatible with a wide range of domestic and import vehicles, including Cadillacs since 1988, Chevrolet trucks since 2003, 1990 Chryslers, Fords since 1995, GM Generation II engines, the 1995 Mitsubishi Eclipse, and more.
Common Questions on Orion Motor Tech Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Set for Removing Harmonic Dampers & Balancers, 3-Jaw Pulley Puller Set Compatible with Chevy GM Chrysler Cadillac Ford More
• What are the dimensions of the jaws on this harmonic balancer puller kit? The jaws on the Orion Motor Tech harmonic balancer puller kit are adjustable, and can accommodate harmonic dampers and balancers ranging in size from 3-1/2 inches to 6-1/2 inches.• What is the maximum weight capacity of this 3-jaw puller set? The maximum weight capacity of the Orion Motor Tech 3-jaw puller set is 5,000 pounds.
• What is the minimum length of the center bolt on this pulley puller set? The minimum length of the center bolt on the Orion Motor Tech pulley puller set is 3-1/4 inches.
Why We Like This
• Quick balancer removal• Safe and easy operation• Wide compatibility• Durable construction• Convenient storage caseAdditional Product Information
| Height | 3 Inches |
| Length | 11 Inches |
| Weight | 4 Pounds |
Benefits of Harmonic Balancer Puller Installer
The harmonic balancer puller installer is a tool that helps to remove and install the harmonic balancer on your engine. This particular tool is designed to save you time and effort when working on your engine. It’s important to have the correct tools for the job, and the harmonic balancer puller installer helps make sure that task is done quickly and correctly. There are many benefits of owning this tool. First, it makes changing the harmonic balancer an easy task. This can be a difficult job if you don’t have the right tools, but with this device it becomes much simpler. Simply put, it removes all of the hassle from swapping out a old or damaged unit for a new one. Another great feature of this product is its ability to grip onto any size or type of bolt securely . Many people often times strip bolts while trying to remove them without proper tools; however, with this handy dandy device , that worry can be put to bed . In addition , there are different sized heads ( 1/2″, 3/4″, 1″ ) so regardless of what size your bolts may be , they’ll fit snugly in place without incident . Last but not least , perhaps one f its most convenient features is how easily transported it is; due in part because its components nest inside one another like Russian Dolls .Buying Guide for Best Harmonic Balancer Puller Installer
When it comes to removing and installing a harmonic balancer, there are two ways to do it – with a hand tool or an impact gun. If you choose to use a hand tool, then you’ll need a harmonic balancer puller installer. These tools screw into the threads in the center of the harmonic balancer, making it easy to remove and install the harmonic balancer without damaging it. There are many different types of harmonic balancer puller installer on the market, so it’s important to choose one that is durable and easy to use. We recommend the following three products: 1. The Lisle Harmonic Balancer Puller Installer is made from high-quality steel for durability and strength. It has a comfortable handle that makes it easy to grip and turn, and the large knob makes it easy to adjust the tension. 2. The ABN Universal Harmonic Balancer Puller Installer also has a comfortable handle for easy grip and turning. The head is made from durable aluminum, and the tips are coated in black oxide for long life and corrosion resistance.Frequently Asked Question
What is the best harmonic balancer puller installer?
There is no definitive answer to this question as there are a variety of different harmonic balancer puller installer tools on the market, each with its own advantages and disadvantages. Some of the factors that you may want to consider when choosing a harmonic balancer puller installer include the specific make and model of your vehicle, the size and weight of the harmonic balancer, and your own personal preferences.
How do I install a harmonic balancer puller?
Most harmonic balancer pullers are universal, meaning they will fit a variety of engines. There are three main parts to the puller: the body, the forcing screw, and the jaws. The body is the largest part of the puller and has either two or three legs. The forcing screw is threaded through the body, and the jaws attach to the ends of the screw. To install the puller, first remove the center bolt from the harmonic balancer. Next, thread the forcing screw into the body until the jaws are flush with the end of the screw. Finally, attach the jaws to the harmonic balancer and tighten the forcing screw until the harmonic balancer is removed from the engine.
What are the steps to install a harmonic balancer puller?
There are a few different types of harmonic balancer pullers, but the most common type is the three-leg puller. To use this type of puller, first locate the three bolts that hold the harmonic balancer to the crankshaft. These bolts will be hidden behind the harmonic balancer, so you will need to use a mirror or a borescope to see them. Once you have found the bolts, remove them with a socket wrench. Next, attach the three legs of the harmonic balancer puller to the three bolts. Be sure to thread the legs onto the bolts evenly, so that the puller is balanced. Once the puller is attached, use a ratchet to turn the center bolt of the puller. This will cause the legs of the puller to expand, and the harmonic balancer should come loose from the crankshaft.
What are the benefits of using a harmonic balancer puller?
A harmonic balancer puller is a tool that is used to remove a harmonic balancer from a vehicle. There are many benefits to using a harmonic balancer puller, including: -It makes removal of the harmonic balancer much easier-It helps to prevent damage to the harmonic balancer-It helps to prevent damage to the vehicle
How do I remove a harmonic balancer puller?
There are a few ways to remove a harmonic balancer puller, but the most common way is to use a wrench or socket to remove the bolts that hold it in place. Once the bolts are removed, the harmonic balancer puller can be removed by gently pulling it away from the engine.