Best Ac Orifice Tube Removal Tool: How To Remove An Orifice Tube From An Air Conditioner

An orifice tube is a small component in your air conditioner that plays a big role in its operation. The orifice tube is located between the evaporator and the condenser, and its main purpose is to regulate the flow of refrigerant between these two important parts of the AC system.

Over time, the orifice tube can become clogged with dirt and debris, which can negatively impact the performance of your air conditioner. If you suspect that your orifice tube is dirty or clogged, you’ll need to remove it so that you can clean it (or replace it, if necessary).

The best way to remove an orifice tube is with a specialized tool known as an orifice tube removal tool. This tool attaches to the end of the refrigerant line and provides a convenient way to remove the orifice tube without damaging it.

If you’re not sure how to use an orifice tube removal tool, don’t worry – we’ll walk you through the process step by step.

Why Ac Orifice Tube Removal Tool Is Necessary?

best ac orifice tube removal tool is necessary to prevent damage to the air conditioner. This tool helps to remove the old orifice tube from the air conditioner and install a new one. It is also used to clean the air conditioner coils and fins.

Comparison Table for Best Ac Orifice Tube Removal Tool

Best Ac Orifice Tube Removal Tool Guidance

AC Orifice Tube Removal Tool Fits for GM Vehicles Car Air Conditioning Orifice Tube Remover Installer Tools

AC Orifice Tube Removal Tool Fits for GM Vehicles Car Air Conditioning Orifice Tube Remover Installer Tools

Check Price On Amazon

The AC orifice tube removal tool is a handy tool that fits most GM vehicles. It is used to disassemble the damaged hole pipe auger and turn it into hole pipes for grasping, so that the nut exerts a uniform and stable pressure to avoid damage the small plastic ears on the tube, make replacement and maintenance easier. Made of high-quality metal, the GUZIKO orifice tube removal tool is sturdy and durable, easy to use, and saves time trying to use needle-nose pliers to enter a small area to pull out the old orifice tube. Just slide the tool into and lock on the tabs on the orifice with a slight twist, and then the old orifice can be pulled and rotated until it comes out. No need to worry about breaking the end with pliers. Sometimes you have to add a little bit of heat on the pipe to make the other accessories to loosen up a little bit. It’s better to apply some heat the heat down and then start pulling. We offer a 12 months service. If you have any problems in use, please contact us at any time, we will respond within 12 hours.

Common Questions on AC Orifice Tube Removal Tool Fits for GM Vehicles Car Air Conditioning Orifice Tube Remover Installer Tools

• What is an AC orifice tube removal tool? An AC orifice tube removal tool is a tool that is used to remove and install an orifice tube in a GM vehicle’s air conditioning system.
• How is the AC orifice tube removal tool used? The AC orifice tube removal tool is inserted into the orifice tube, and then the tool is turned to loosen and remove the tube.
• What are the benefits of using an AC orifice tube removal tool? The benefits of using an AC orifice tube removal tool include being able to quickly and easily remove and install an orifice tube, and preventing damage to the orifice tube during removal and installation.
• How often should the AC orifice tube removal tool be used? The AC orifice tube removal tool should be used every time an orifice tube needs to be removed or installed in a GM vehicle’s air conditioning system.

Why We Like This

• 1.The AC Orifice Tube Removal Tool fits for most GM vehicles
• 2. It is used to disassemble the damaged hole pipe auger and turn it into hole pipes for grasping, so that the nut exerts a uniform and stable pressure to avoid damage the small plastic ears on the tube, make replacement and maintenance easier
• 3. The tool is made of high quality metal, which is sturdy and durable
• 4.The tool can be slid into and locked on the tabs on the orifice with a slight twist, and then the old orifice can be pulled and rotated until it can come out
• 5.We will offer a 12 months service, if you have any problems in use, Please contact us at any time, we will respond within 12 hours

Additional Product Information

Height1.968503935 Inches
Length5.905511805 Inches

OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool,A/C Orifice Tube Remover/installerr

OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool,A/C Orifice Tube Remover/installerr

Check Price On Amazon

Whether you’re a professional mechanic or a do-it-yourselfer, you know that working on your car’s air conditioning system can be a delicate task. The orifice tube is a small, but important, part of the system, and removing it can be tricky. That’s where the OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool comes in. This tool is designed specifically for removing and installing orifice tubes, and makes the job much easier. The Orifice Tube Removal Tool slides in and locks on to the tabs on the orifice with a slight twist. Then you can pull or rotate the old orifice out. This saves time and hassle, and prevents damage to the small plastic parts. The Orifice Tube Removal Tool is made of high quality metal for durability, and is easy to use. It’s a must-have tool for anyone working on their car’s air conditioning system.

Common Questions on OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool,A/C Orifice Tube Remover/installerr

• What is the OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool,A/C Orifice Tube Remover/installerr? The OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool,A/C Orifice Tube Remover/installerr is a tool used to remove and install orifice tubes in air conditioning systems.
•How is the OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool,A/C Orifice Tube Remover/installerr used? The tool is inserted into the orifice tube and then turned to remove the tube.

Why We Like This

• Remove and install orifice tubes
• Easily turn into orifice tube for grip
• Made of high quality metal
• Use the nut to apply even and steady pressure
• Fit many GM vehicles

Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles

Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles

Check Price On Amazon

The Robinair 10986 Orifice Tube Service Kit is a must-have for anyone who works on automotive air conditioning systems. This handy tool allows you to remove the orifice tube before flushing the A/C system, which speeds up the service process by removing build-up and restrictions that can slow down the flushing process. The basic kit comes with everything you need to work on General Motors and Ford vehicles, and there are additional adapters available for specific applications. The Ford adapter allows you to work on 1985 and newer models, while the General Motors adapter works on 1989-91 GM ‘J’, ‘L’, and ‘N’ cars, and 1991 and newer ‘C’ and ‘K’ series trucks (for trucks with No 3096068 orifices).

Common Questions on Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles

• What is Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles? The kit includes an orifice tube, o-rings, and a installation instruction sheet. It is designed to service Robinair 10986 Orifice Tube Service Kits on Ford and General Motors vehicles.
• How do you use the Robinair 10986 Orifice Tube Service Kit? First, soak the o-rings in clean refrigerant oil. Next, locate the orifice tube in the vehicle. It is usually located in the liquid line near the evaporator. Then, remove the old orifice tube and install the new one. Be sure to lubricate the o-rings with refrigerant oil before installing them. Finally, bleed the air from the system using the instructions in the installation sheet.

Why We Like This

• Allows removal of orifice tubes before flushing
• Speeds A/C service
• Basic tool works on General Motors and Ford vehicles
• Comes with additional adapters for specific applications
• Ford: extender body for 1985 and newer models
• General Motors: 1989 91 GM ‘J’, ‘L’, and ‘N’ car adapter, and 1991 and newer ‘C’ and ‘K’ series truck adapter (for trucks with No 3096068 orifices)

Additional Product Information

Color1
Height1.6 Inches
Length8.3 Inches
Weight0.7 Pounds

Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool

Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool

Check Price On Amazon

Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool is a good quality product made of metal. It is brand new, and includes a set of 1 tube removal tool. This product is cleverly designed and is perfect for air conditioning orifices.

Common Questions on Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool

• What is the Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool? The Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool is a tool that helps remove orifice tubes from car air conditioning systems.
• How does the Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool work? The Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool helps remove orifice tubes from car air conditioning systems by rotating the tube and detaching it from the system.
• Why would I need to use the Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool? The Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool helps remove orifice tubes from car air conditioning systems so that they can be replaced or repaired.
• How often should I use the Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool? The Nikauto 1Set Car Air Conditioning Orifice Tube Removal Tool should be used as needed when removing orifice tubes from car air conditioning systems.
• What are some of the benefits of using the Nikauto 1Set Car Air Conditioning Orifice Tube

Why We Like This

Made of high quality metal for durability Package includes 1 set of orifice tube removal tools Ideal for removing orifice tubes from air conditioning units Great for car owners and mechanics Easy to use

NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles

NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles

Check Price On Amazon

Are you looking for a reliable and durable orifice tube removal tool? Look no further than the NFSpeeding Orifice Tube Removal Tool! This top-quality tool is specially designed for removing and installing orifice tubes on GM vehicles, and it comes with a 12-month quality guarantee. Made of high-quality metal, the NFSpeeding Orifice Tube Removal Tool is anti-corrosion and rust-resistant, and it perfectly fits the original car data. With this professional tool, replacement and maintenance will be a breeze!

Common Questions on NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles

• What is the NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles? The NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles is a tool that helps remove and install orifice tubes in GM vehicles.
• How does the NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles work? The NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles helps remove and install orifice tubes in GM vehicles by gripping the tube and turning it in the appropriate direction.
• What are the benefits of using the NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles? The NFSpeeding Orifice Tube Removal Tool for Car Air Conditioning A/C Orifice Tube Remover/Installerr Fits for GM Vehicles helps make removing and installing

Why We Like This

• Compatible with most GM vehicles
• Allows for removal and installation of orifice tubes
• Made of high quality metal
• Precision fit
• 12 month quality guarantee

Benefits of Ac Orifice Tube Removal Tool

An orifice tube is a small device located in the air conditioning system of a vehicle. It helps regulate the flow of refrigerant and keeps it from leaking. Over time, however, the orifice tube can become clogged with dirt and debris, which can restrict airflow and cause problems with the AC system. The best way to clean an orifice tube is with a special tool known as an orifice tube removal tool. This tool looks like a small brush and is designed to fit into the end of the orifice tube. It has bristles that help loosen and remove any debris that may be stuck inside thetube.

Buying Guide for Best Ac Orifice Tube Removal Tool

If you need to remove an ac orifice tube, there are a few different ways to go about it. One option is to use a small pick or other sharp object to pry the tube out. Another option is to use an ac orifice tube removal tool. There are a few things to keep in mind when purchasing an ac orifice tube removal tool. First, you’ll want to make sure that the tool is made from durable materials that won’t break easily. Second, you’ll want to choose a tool that is easy to use and that will not damage the surrounding area. Finally, you’ll want to consider the price of the tool before making your purchase. Ac orifice tube removal tools can range in price from around $10-$100, so be sure to compare prices before making your final decision.

Frequently Asked Question

What are the different types of ac orifice tube removal tools available?

There are a few different types of tools available for removing ac orifice tubes. Some are designed to be used with an impact wrench, while others are designed to be used by hand. The most common type of tool is the orifice tube pliers. These pliers are designed to grip the orifice tube and pull it out of the ac unit.

Which ac orifice tube removal tool is the best for my needs?

This is a difficult question to answer as it depends on the specific needs of the individual. Some factors to consider include the type of air conditioner, the size of the unit, and the ease of use.

What are the pros and cons of each type of ac orifice tube removal tool?

Some pros of using an ac orifice tube removal tool are that it can be less messy than other methods, it can be faster and easier than other methods, and it can be less expensive than other methods. Some cons of using an ac orifice tube removal tool are that it can be difficult to remove the tube without damaging it, it can be difficult to reach some tubes with the tool, and it is not always the best option for removing a tube.

How do I know if an ac orifice tube removal tool is right for me?

There is no definitive answer, and it really depends on your specific situation. If you are unsure, it is always best to consult with a qualified HVAC technician to assess your needs and make a recommendation.

What are some tips on using ac orifice tube removal tools?

Some tips on using ac orifice tube removal tools include: -Wearing gloves to protect your hands from the sharp edges of the tool. -Using a safe, steady motion to avoid damaging the orifice tube. -Placing a towel or other soft material under the orifice tube to protect it from being scratched or damaged during removal.

Conclusion

Best ac orifice tube removal tool is the one that can help you remove the orifice tube without damaging it. With this tool, you can easily remove the orifice tube and clean it. This tool is also very easy to operate and it is very affordable.

Leave a Comment